ClabureDB: Classified Bug-Reports Database

   /*
    * Copyright(c) 2006 - 2007 Atheros Corporation. All rights reserved.
    * Copyright(c) 2007 - 2008 Chris Snook <csnook@redhat.com>
    *
    * Derived from Intel e1000 driver
    * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
    *
    * This program is free software; you can redistribute it and/or modify it
    * under the terms of the GNU General Public License as published by the Free
   * Software Foundation; either version 2 of the License, or (at your option)
   * any later version.
   *
   * This program is distributed in the hope that it will be useful, but WITHOUT
   * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
   * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
   * more details.
   *
   * You should have received a copy of the GNU General Public License along with
   * this program; if not, write to the Free Software Foundation, Inc., 59
   * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
   */
  
  #include <asm/atomic.h>
  #include <linux/crc32.h>
  #include <linux/dma-mapping.h>
  #include <linux/etherdevice.h>
  #include <linux/ethtool.h>
  #include <linux/hardirq.h>
  #include <linux/if_vlan.h>
  #include <linux/in.h>
  #include <linux/interrupt.h>
  #include <linux/ip.h>
  #include <linux/irqflags.h>
  #include <linux/irqreturn.h>
  #include <linux/mii.h>
  #include <linux/net.h>
  #include <linux/netdevice.h>
  #include <linux/pci.h>
  #include <linux/pci_ids.h>
  #include <linux/pm.h>
  #include <linux/skbuff.h>
  #include <linux/spinlock.h>
  #include <linux/string.h>
  #include <linux/tcp.h>
  #include <linux/timer.h>
  #include <linux/types.h>
  #include <linux/workqueue.h>
  
  #include "atl2.h"
  
  #define ATL2_DRV_VERSION "2.2.3"
  
  static char atl2_driver_name[] = "atl2";
  static const char atl2_driver_string[] = "Atheros(R) L2 Ethernet Driver";
  static char atl2_copyright[] = "Copyright (c) 2007 Atheros Corporation.";
  static char atl2_driver_version[] = ATL2_DRV_VERSION;
  
  MODULE_AUTHOR("Atheros Corporation <xiong.huang@atheros.com>, Chris Snook <csnook@redhat.com>");
  MODULE_DESCRIPTION("Atheros Fast Ethernet Network Driver");
  MODULE_LICENSE("GPL");
  MODULE_VERSION(ATL2_DRV_VERSION);
  
  /*
   * atl2_pci_tbl - PCI Device ID Table
   */
  static struct pci_device_id atl2_pci_tbl[] = {
          {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2)},
          /* required last entry */
          {0,}
  };
  MODULE_DEVICE_TABLE(pci, atl2_pci_tbl);
  
  static void atl2_set_ethtool_ops(struct net_device *netdev);
  
  static void atl2_check_options(struct atl2_adapter *adapter);
  
  /*
   * atl2_sw_init - Initialize general software structures (struct atl2_adapter)
   * @adapter: board private structure to initialize
   *
   * atl2_sw_init initializes the Adapter private data structure.
   * Fields are initialized based on PCI device information and
   * OS network device settings (MTU size).
   */
  static int __devinit atl2_sw_init(struct atl2_adapter *adapter)
  {
          struct atl2_hw *hw = &adapter->hw;
          struct pci_dev *pdev = adapter->pdev;
  
          /* PCI config space info */
          hw->vendor_id = pdev->vendor;
          hw->device_id = pdev->device;
          hw->subsystem_vendor_id = pdev->subsystem_vendor;
          hw->subsystem_id = pdev->subsystem_device;
  
          pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
          pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
  
          adapter->wol = 0;
         adapter->ict = 50000;  /* ~100ms */
         adapter->link_speed = SPEED_0;   /* hardware init */
         adapter->link_duplex = FULL_DUPLEX;
 
         hw->phy_configured = false;
         hw->preamble_len = 7;
         hw->ipgt = 0x60;
         hw->min_ifg = 0x50;
         hw->ipgr1 = 0x40;
         hw->ipgr2 = 0x60;
         hw->retry_buf = 2;
         hw->max_retry = 0xf;
         hw->lcol = 0x37;
         hw->jam_ipg = 7;
         hw->fc_rxd_hi = 0;
         hw->fc_rxd_lo = 0;
         hw->max_frame_size = adapter->netdev->mtu;
 
         spin_lock_init(&adapter->stats_lock);
 
         set_bit(__ATL2_DOWN, &adapter->flags);
 
         return 0;
 }
 
 /*
  * atl2_set_multi - Multicast and Promiscuous mode set
  * @netdev: network interface device structure
  *
  * The set_multi entry point is called whenever the multicast address
  * list or the network interface flags are updated.  This routine is
  * responsible for configuring the hardware for proper multicast,
  * promiscuous mode, and all-multi behavior.
  */
 static void atl2_set_multi(struct net_device *netdev)
 {
         struct atl2_adapter *adapter = netdev_priv(netdev);
         struct atl2_hw *hw = &adapter->hw;
         struct dev_mc_list *mc_ptr;
         u32 rctl;
         u32 hash_value;
 
         /* Check for Promiscuous and All Multicast modes */
         rctl = ATL2_READ_REG(hw, REG_MAC_CTRL);
 
         if (netdev->flags & IFF_PROMISC) {
                 rctl |= MAC_CTRL_PROMIS_EN;
         } else if (netdev->flags & IFF_ALLMULTI) {
                 rctl |= MAC_CTRL_MC_ALL_EN;
                 rctl &= ~MAC_CTRL_PROMIS_EN;
         } else
                 rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
 
         ATL2_WRITE_REG(hw, REG_MAC_CTRL, rctl);
 
         /* clear the old settings from the multicast hash table */
         ATL2_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
         ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
 
         /* comoute mc addresses' hash value ,and put it into hash table */
         for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
                 hash_value = atl2_hash_mc_addr(hw, mc_ptr->dmi_addr);
                 atl2_hash_set(hw, hash_value);
         }
 }
 
 static void init_ring_ptrs(struct atl2_adapter *adapter)
 {
         /* Read / Write Ptr Initialize: */
         adapter->txd_write_ptr = 0;
         atomic_set(&adapter->txd_read_ptr, 0);
 
         adapter->rxd_read_ptr = 0;
         adapter->rxd_write_ptr = 0;
 
         atomic_set(&adapter->txs_write_ptr, 0);
         adapter->txs_next_clear = 0;
 }
 
 /*
  * atl2_configure - Configure Transmit&Receive Unit after Reset
  * @adapter: board private structure
  *
  * Configure the Tx /Rx unit of the MAC after a reset.
  */
 static int atl2_configure(struct atl2_adapter *adapter)
 {
         struct atl2_hw *hw = &adapter->hw;
         u32 value;
 
         /* clear interrupt status */
         ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0xffffffff);
 
         /* set MAC Address */
         value = (((u32)hw->mac_addr[2]) << 24) |
                 (((u32)hw->mac_addr[3]) << 16) |
                 (((u32)hw->mac_addr[4]) << 8) |
                 (((u32)hw->mac_addr[5]));
         ATL2_WRITE_REG(hw, REG_MAC_STA_ADDR, value);
         value = (((u32)hw->mac_addr[0]) << 8) |
                 (((u32)hw->mac_addr[1]));
         ATL2_WRITE_REG(hw, (REG_MAC_STA_ADDR+4), value);
 
         /* HI base address */
         ATL2_WRITE_REG(hw, REG_DESC_BASE_ADDR_HI,
                 (u32)((adapter->ring_dma & 0xffffffff00000000ULL) >> 32));
 
         /* LO base address */
         ATL2_WRITE_REG(hw, REG_TXD_BASE_ADDR_LO,
                 (u32)(adapter->txd_dma & 0x00000000ffffffffULL));
         ATL2_WRITE_REG(hw, REG_TXS_BASE_ADDR_LO,
                 (u32)(adapter->txs_dma & 0x00000000ffffffffULL));
         ATL2_WRITE_REG(hw, REG_RXD_BASE_ADDR_LO,
                 (u32)(adapter->rxd_dma & 0x00000000ffffffffULL));
 
         /* element count */
         ATL2_WRITE_REGW(hw, REG_TXD_MEM_SIZE, (u16)(adapter->txd_ring_size/4));
         ATL2_WRITE_REGW(hw, REG_TXS_MEM_SIZE, (u16)adapter->txs_ring_size);
         ATL2_WRITE_REGW(hw, REG_RXD_BUF_NUM,  (u16)adapter->rxd_ring_size);
 
         /* config Internal SRAM */
 /*
     ATL2_WRITE_REGW(hw, REG_SRAM_TXRAM_END, sram_tx_end);
     ATL2_WRITE_REGW(hw, REG_SRAM_TXRAM_END, sram_rx_end);
 */
 
         /* config IPG/IFG */
         value = (((u32)hw->ipgt & MAC_IPG_IFG_IPGT_MASK) <<
                 MAC_IPG_IFG_IPGT_SHIFT) |
                 (((u32)hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) <<
                 MAC_IPG_IFG_MIFG_SHIFT) |
                 (((u32)hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) <<
                 MAC_IPG_IFG_IPGR1_SHIFT)|
                 (((u32)hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) <<
                 MAC_IPG_IFG_IPGR2_SHIFT);
         ATL2_WRITE_REG(hw, REG_MAC_IPG_IFG, value);
 
         /* config  Half-Duplex Control */
         value = ((u32)hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) |
                 (((u32)hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) <<
                 MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) |
                 MAC_HALF_DUPLX_CTRL_EXC_DEF_EN |
                 (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) |
                 (((u32)hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) <<
                 MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT);
         ATL2_WRITE_REG(hw, REG_MAC_HALF_DUPLX_CTRL, value);
 
         /* set Interrupt Moderator Timer */
         ATL2_WRITE_REGW(hw, REG_IRQ_MODU_TIMER_INIT, adapter->imt);
         ATL2_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_ITIMER_EN);
 
         /* set Interrupt Clear Timer */
         ATL2_WRITE_REGW(hw, REG_CMBDISDMA_TIMER, adapter->ict);
 
         /* set MTU */
         ATL2_WRITE_REG(hw, REG_MTU, adapter->netdev->mtu +
                 ENET_HEADER_SIZE + VLAN_SIZE + ETHERNET_FCS_SIZE);
 
         /* 1590 */
         ATL2_WRITE_REG(hw, REG_TX_CUT_THRESH, 0x177);
 
         /* flow control */
         ATL2_WRITE_REGW(hw, REG_PAUSE_ON_TH, hw->fc_rxd_hi);
         ATL2_WRITE_REGW(hw, REG_PAUSE_OFF_TH, hw->fc_rxd_lo);
 
         /* Init mailbox */
         ATL2_WRITE_REGW(hw, REG_MB_TXD_WR_IDX, (u16)adapter->txd_write_ptr);
         ATL2_WRITE_REGW(hw, REG_MB_RXD_RD_IDX, (u16)adapter->rxd_read_ptr);
 
         /* enable DMA read/write */
         ATL2_WRITE_REGB(hw, REG_DMAR, DMAR_EN);
         ATL2_WRITE_REGB(hw, REG_DMAW, DMAW_EN);
 
         value = ATL2_READ_REG(&adapter->hw, REG_ISR);
         if ((value & ISR_PHY_LINKDOWN) != 0)
                 value = 1; /* config failed */
         else
                 value = 0;
 
         /* clear all interrupt status */
         ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0x3fffffff);
         ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0);
         return value;
 }
 
 /*
  * atl2_setup_ring_resources - allocate Tx / RX descriptor resources
  * @adapter: board private structure
  *
  * Return 0 on success, negative on failure
  */
 static s32 atl2_setup_ring_resources(struct atl2_adapter *adapter)
 {
         struct pci_dev *pdev = adapter->pdev;
         int size;
         u8 offset = 0;
 
         /* real ring DMA buffer */
         adapter->ring_size = size =
                 adapter->txd_ring_size * 1 + 7 +        /* dword align */
                 adapter->txs_ring_size * 4 + 7 +        /* dword align */
                 adapter->rxd_ring_size * 1536 + 127;        /* 128bytes align */
 
         adapter->ring_vir_addr = pci_alloc_consistent(pdev, size,
                 &adapter->ring_dma);
         if (!adapter->ring_vir_addr)
                 return -ENOMEM;
         memset(adapter->ring_vir_addr, 0, adapter->ring_size);
 
         /* Init TXD Ring */
         adapter->txd_dma = adapter->ring_dma ;
         offset = (adapter->txd_dma & 0x7) ? (8 - (adapter->txd_dma & 0x7)) : 0;
         adapter->txd_dma += offset;
         adapter->txd_ring = (struct tx_pkt_header *) (adapter->ring_vir_addr +
                 offset);
 
         /* Init TXS Ring */
         adapter->txs_dma = adapter->txd_dma + adapter->txd_ring_size;
         offset = (adapter->txs_dma & 0x7) ? (8 - (adapter->txs_dma & 0x7)) : 0;
         adapter->txs_dma += offset;
         adapter->txs_ring = (struct tx_pkt_status *)
                 (((u8 *)adapter->txd_ring) + (adapter->txd_ring_size + offset));
 
         /* Init RXD Ring */
         adapter->rxd_dma = adapter->txs_dma + adapter->txs_ring_size * 4;
         offset = (adapter->rxd_dma & 127) ?
                 (128 - (adapter->rxd_dma & 127)) : 0;
         if (offset > 7)
                 offset -= 8;
         else
                 offset += (128 - 8);
 
         adapter->rxd_dma += offset;
         adapter->rxd_ring = (struct rx_desc *) (((u8 *)adapter->txs_ring) +
                 (adapter->txs_ring_size * 4 + offset));
 
 /*
  * Read / Write Ptr Initialize:
  *      init_ring_ptrs(adapter);
  */
         return 0;
 }
 
 /*
  * atl2_irq_enable - Enable default interrupt generation settings
  * @adapter: board private structure
  */
 static inline void atl2_irq_enable(struct atl2_adapter *adapter)
 {
         ATL2_WRITE_REG(&adapter->hw, REG_IMR, IMR_NORMAL_MASK);
         ATL2_WRITE_FLUSH(&adapter->hw);
 }
 
 /*
  * atl2_irq_disable - Mask off interrupt generation on the NIC
  * @adapter: board private structure
  */
 static inline void atl2_irq_disable(struct atl2_adapter *adapter)
 {
     ATL2_WRITE_REG(&adapter->hw, REG_IMR, 0);
     ATL2_WRITE_FLUSH(&adapter->hw);
     synchronize_irq(adapter->pdev->irq);
 }
 
 #ifdef NETIF_F_HW_VLAN_TX
 static void atl2_vlan_rx_register(struct net_device *netdev,
         struct vlan_group *grp)
 {
         struct atl2_adapter *adapter = netdev_priv(netdev);
         u32 ctrl;
 
         atl2_irq_disable(adapter);
         adapter->vlgrp = grp;
 
         if (grp) {
                 /* enable VLAN tag insert/strip */
                 ctrl = ATL2_READ_REG(&adapter->hw, REG_MAC_CTRL);
                 ctrl |= MAC_CTRL_RMV_VLAN;
                 ATL2_WRITE_REG(&adapter->hw, REG_MAC_CTRL, ctrl);
         } else {
                 /* disable VLAN tag insert/strip */
                 ctrl = ATL2_READ_REG(&adapter->hw, REG_MAC_CTRL);
                 ctrl &= ~MAC_CTRL_RMV_VLAN;
                 ATL2_WRITE_REG(&adapter->hw, REG_MAC_CTRL, ctrl);
         }
 
         atl2_irq_enable(adapter);
 }
 
 static void atl2_restore_vlan(struct atl2_adapter *adapter)
 {
         atl2_vlan_rx_register(adapter->netdev, adapter->vlgrp);
 }
 #endif
 
 static void atl2_intr_rx(struct atl2_adapter *adapter)
 {
         struct net_device *netdev = adapter->netdev;
         struct rx_desc *rxd;
         struct sk_buff *skb;
 
         do {
                 rxd = adapter->rxd_ring+adapter->rxd_write_ptr;
                 if (!rxd->status.update)
                         break; /* end of tx */
 
                 /* clear this flag at once */
                 rxd->status.update = 0;
 
                 if (rxd->status.ok && rxd->status.pkt_size >= 60) {
                         int rx_size = (int)(rxd->status.pkt_size - 4);
                         /* alloc new buffer */
                         skb = netdev_alloc_skb(netdev, rx_size + NET_IP_ALIGN);
                         if (NULL == skb) {
                                 printk(KERN_WARNING
                                         "%s: Mem squeeze, deferring packet.\n",
                                         netdev->name);
                                 /*
                                  * Check that some rx space is free. If not,
                                  * free one and mark stats->rx_dropped++.
                                  */
                                 adapter->net_stats.rx_dropped++;
                                 break;
                         }
                         skb_reserve(skb, NET_IP_ALIGN);
                         skb->dev = netdev;
                         memcpy(skb->data, rxd->packet, rx_size);
                         skb_put(skb, rx_size);
                         skb->protocol = eth_type_trans(skb, netdev);
 #ifdef NETIF_F_HW_VLAN_TX
                         if (adapter->vlgrp && (rxd->status.vlan)) {
                                 u16 vlan_tag = (rxd->status.vtag>>4) |
                                         ((rxd->status.vtag&7) << 13) |
                                         ((rxd->status.vtag&8) << 9);
                                 vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag);
                         } else
 #endif
                         netif_rx(skb);
                         adapter->net_stats.rx_bytes += rx_size;
                         adapter->net_stats.rx_packets++;
                         netdev->last_rx = jiffies;
                 } else {
                         adapter->net_stats.rx_errors++;
 
                         if (rxd->status.ok && rxd->status.pkt_size <= 60)
                                 adapter->net_stats.rx_length_errors++;
                         if (rxd->status.mcast)
                                 adapter->net_stats.multicast++;
                         if (rxd->status.crc)
                                 adapter->net_stats.rx_crc_errors++;
                         if (rxd->status.align)
                                 adapter->net_stats.rx_frame_errors++;
                 }
 
                 /* advance write ptr */
                 if (++adapter->rxd_write_ptr == adapter->rxd_ring_size)
                         adapter->rxd_write_ptr = 0;
         } while (1);
 
         /* update mailbox? */
         adapter->rxd_read_ptr = adapter->rxd_write_ptr;
         ATL2_WRITE_REGW(&adapter->hw, REG_MB_RXD_RD_IDX, adapter->rxd_read_ptr);
 }
 
 static void atl2_intr_tx(struct atl2_adapter *adapter)
 {
         u32 txd_read_ptr;
         u32 txs_write_ptr;
         struct tx_pkt_status *txs;
         struct tx_pkt_header *txph;
         int free_hole = 0;
 
         do {
                 txs_write_ptr = (u32) atomic_read(&adapter->txs_write_ptr);
                 txs = adapter->txs_ring + txs_write_ptr;
                 if (!txs->update)
                         break; /* tx stop here */
 
                 free_hole = 1;
                 txs->update = 0;
 
                 if (++txs_write_ptr == adapter->txs_ring_size)
                         txs_write_ptr = 0;
                 atomic_set(&adapter->txs_write_ptr, (int)txs_write_ptr);
 
                 txd_read_ptr = (u32) atomic_read(&adapter->txd_read_ptr);
                 txph = (struct tx_pkt_header *)
                         (((u8 *)adapter->txd_ring) + txd_read_ptr);
 
                 if (txph->pkt_size != txs->pkt_size) {
                         struct tx_pkt_status *old_txs = txs;
                         printk(KERN_WARNING
                                 "%s: txs packet size not consistent with txd"
                                 " txd_:0x%08x, txs_:0x%08x!\n",
                                 adapter->netdev->name,
                                 *(u32 *)txph, *(u32 *)txs);
                         printk(KERN_WARNING
                                 "txd read ptr: 0x%x\n",
                                 txd_read_ptr);
                         txs = adapter->txs_ring + txs_write_ptr;
                         printk(KERN_WARNING
                                 "txs-behind:0x%08x\n",
                                 *(u32 *)txs);
                         if (txs_write_ptr < 2) {
                                 txs = adapter->txs_ring +
                                         (adapter->txs_ring_size +
                                         txs_write_ptr - 2);
                         } else {
                                 txs = adapter->txs_ring + (txs_write_ptr - 2);
                         }
                         printk(KERN_WARNING
                                 "txs-before:0x%08x\n",
                                 *(u32 *)txs);
                         txs = old_txs;
                 }
 
                  /* 4for TPH */
                 txd_read_ptr += (((u32)(txph->pkt_size) + 7) & ~3);
                 if (txd_read_ptr >= adapter->txd_ring_size)
                         txd_read_ptr -= adapter->txd_ring_size;
 
                 atomic_set(&adapter->txd_read_ptr, (int)txd_read_ptr);
 
                 /* tx statistics: */
                 if (txs->ok) {
                         adapter->net_stats.tx_bytes += txs->pkt_size;
                         adapter->net_stats.tx_packets++;
                 }
                 else
                         adapter->net_stats.tx_errors++;
 
                 if (txs->defer)
                         adapter->net_stats.collisions++;
                 if (txs->abort_col)
                         adapter->net_stats.tx_aborted_errors++;
                 if (txs->late_col)
                         adapter->net_stats.tx_window_errors++;
                 if (txs->underun)
                         adapter->net_stats.tx_fifo_errors++;
         } while (1);
 
         if (free_hole) {
                 if (netif_queue_stopped(adapter->netdev) &&
                         netif_carrier_ok(adapter->netdev))
                         netif_wake_queue(adapter->netdev);
         }
 }
 
 static void atl2_check_for_link(struct atl2_adapter *adapter)
 {
         struct net_device *netdev = adapter->netdev;
         u16 phy_data = 0;
 
         spin_lock(&adapter->stats_lock);
         atl2_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
         atl2_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
         spin_unlock(&adapter->stats_lock);
 
         /* notify upper layer link down ASAP */
         if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */
                 if (netif_carrier_ok(netdev)) { /* old link state: Up */
                 printk(KERN_INFO "%s: %s NIC Link is Down\n",
                         atl2_driver_name, netdev->name);
                 adapter->link_speed = SPEED_0;
                 netif_carrier_off(netdev);
                 netif_stop_queue(netdev);
                 }
         }
         schedule_work(&adapter->link_chg_task);
 }
 
 static inline void atl2_clear_phy_int(struct atl2_adapter *adapter)
 {
         u16 phy_data;
         spin_lock(&adapter->stats_lock);
         atl2_read_phy_reg(&adapter->hw, 19, &phy_data);
         spin_unlock(&adapter->stats_lock);
 }
 
 /*
  * atl2_intr - Interrupt Handler
  * @irq: interrupt number
  * @data: pointer to a network interface device structure
  * @pt_regs: CPU registers structure
  */
 static irqreturn_t atl2_intr(int irq, void *data)
 {
         struct atl2_adapter *adapter = netdev_priv(data);
         struct atl2_hw *hw = &adapter->hw;
         u32 status;
 
         status = ATL2_READ_REG(hw, REG_ISR);
         if (0 == status)
                 return IRQ_NONE;
 
         /* link event */
         if (status & ISR_PHY)
                 atl2_clear_phy_int(adapter);
 
         /* clear ISR status, and Enable CMB DMA/Disable Interrupt */
         ATL2_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT);
 
         /* check if PCIE PHY Link down */
         if (status & ISR_PHY_LINKDOWN) {
                 if (netif_running(adapter->netdev)) { /* reset MAC */
                         ATL2_WRITE_REG(hw, REG_ISR, 0);
                         ATL2_WRITE_REG(hw, REG_IMR, 0);
                         ATL2_WRITE_FLUSH(hw);
                         schedule_work(&adapter->reset_task);
                         return IRQ_HANDLED;
                 }
         }
 
         /* check if DMA read/write error? */
         if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
                 ATL2_WRITE_REG(hw, REG_ISR, 0);
                 ATL2_WRITE_REG(hw, REG_IMR, 0);
                 ATL2_WRITE_FLUSH(hw);
                 schedule_work(&adapter->reset_task);
                 return IRQ_HANDLED;
         }
 
         /* link event */
         if (status & (ISR_PHY | ISR_MANUAL)) {
                 adapter->net_stats.tx_carrier_errors++;
                 atl2_check_for_link(adapter);
         }
 
         /* transmit event */
         if (status & ISR_TX_EVENT)
                 atl2_intr_tx(adapter);
 
         /* rx exception */
         if (status & ISR_RX_EVENT)
                 atl2_intr_rx(adapter);
 
         /* re-enable Interrupt */
         ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0);
         return IRQ_HANDLED;
 }
 
 static int atl2_request_irq(struct atl2_adapter *adapter)
 {
         struct net_device *netdev = adapter->netdev;
         int flags, err = 0;
 
         flags = IRQF_SHARED;
 #ifdef CONFIG_PCI_MSI
         adapter->have_msi = true;
         err = pci_enable_msi(adapter->pdev);
         if (err)
                 adapter->have_msi = false;
 
         if (adapter->have_msi)
                 flags &= ~IRQF_SHARED;
 #endif
 
         return request_irq(adapter->pdev->irq, &atl2_intr, flags, netdev->name,
                 netdev);
 }
 
 /*
  * atl2_free_ring_resources - Free Tx / RX descriptor Resources
  * @adapter: board private structure
  *
  * Free all transmit software resources
  */
 static void atl2_free_ring_resources(struct atl2_adapter *adapter)
 {
         struct pci_dev *pdev = adapter->pdev;
         pci_free_consistent(pdev, adapter->ring_size, adapter->ring_vir_addr,
                 adapter->ring_dma);
 }
 
 /*
  * atl2_open - Called when a network interface is made active
  * @netdev: network interface device structure
  *
  * Returns 0 on success, negative value on failure
  *
  * The open entry point is called when a network interface is made
  * active by the system (IFF_UP).  At this point all resources needed
  * for transmit and receive operations are allocated, the interrupt
  * handler is registered with the OS, the watchdog timer is started,
  * and the stack is notified that the interface is ready.
  */
 static int atl2_open(struct net_device *netdev)
 {
         struct atl2_adapter *adapter = netdev_priv(netdev);
         int err;
         u32 val;
 
         /* disallow open during test */
         if (test_bit(__ATL2_TESTING, &adapter->flags))
                 return -EBUSY;
 
         /* allocate transmit descriptors */
         err = atl2_setup_ring_resources(adapter);
         if (err)
                 return err;
 
         err = atl2_init_hw(&adapter->hw);
         if (err) {
                 err = -EIO;
                 goto err_init_hw;
         }
 
         /* hardware has been reset, we need to reload some things */
         atl2_set_multi(netdev);
         init_ring_ptrs(adapter);
 
 #ifdef NETIF_F_HW_VLAN_TX
         atl2_restore_vlan(adapter);
 #endif
 
         if (atl2_configure(adapter)) {
                 err = -EIO;
                 goto err_config;
         }
 
         err = atl2_request_irq(adapter);
         if (err)
                 goto err_req_irq;
 
         clear_bit(__ATL2_DOWN, &adapter->flags);
 
         mod_timer(&adapter->watchdog_timer, jiffies + 4*HZ);
 
         val = ATL2_READ_REG(&adapter->hw, REG_MASTER_CTRL);
         ATL2_WRITE_REG(&adapter->hw, REG_MASTER_CTRL,
                 val | MASTER_CTRL_MANUAL_INT);
 
         atl2_irq_enable(adapter);
 
         return 0;
 
 err_init_hw:
 err_req_irq:
 err_config:
         atl2_free_ring_resources(adapter);
         atl2_reset_hw(&adapter->hw);
 
         return err;
 }
 
 static void atl2_down(struct atl2_adapter *adapter)
 {
         struct net_device *netdev = adapter->netdev;
 
         /* signal that we're down so the interrupt handler does not
          * reschedule our watchdog timer */
         set_bit(__ATL2_DOWN, &adapter->flags);
 
         netif_tx_disable(netdev);
 
         /* reset MAC to disable all RX/TX */
         atl2_reset_hw(&adapter->hw);
         msleep(1);
 
         atl2_irq_disable(adapter);
 
         del_timer_sync(&adapter->watchdog_timer);
         del_timer_sync(&adapter->phy_config_timer);
         clear_bit(0, &adapter->cfg_phy);
 
         netif_carrier_off(netdev);
         adapter->link_speed = SPEED_0;
         adapter->link_duplex = -1;
 }
 
 static void atl2_free_irq(struct atl2_adapter *adapter)
 {
         struct net_device *netdev = adapter->netdev;
 
         free_irq(adapter->pdev->irq, netdev);
 
 #ifdef CONFIG_PCI_MSI
         if (adapter->have_msi)
                 pci_disable_msi(adapter->pdev);
 #endif
 }
 
 /*
  * atl2_close - Disables a network interface
  * @netdev: network interface device structure
  *
  * Returns 0, this is not allowed to fail
  *
  * The close entry point is called when an interface is de-activated
  * by the OS.  The hardware is still under the drivers control, but
  * needs to be disabled.  A global MAC reset is issued to stop the
  * hardware, and all transmit and receive resources are freed.
  */
 static int atl2_close(struct net_device *netdev)
 {
         struct atl2_adapter *adapter = netdev_priv(netdev);
 
         WARN_ON(test_bit(__ATL2_RESETTING, &adapter->flags));
 
         atl2_down(adapter);
         atl2_free_irq(adapter);
         atl2_free_ring_resources(adapter);
 
         return 0;
 }
 
 static inline int TxsFreeUnit(struct atl2_adapter *adapter)
 {
         u32 txs_write_ptr = (u32) atomic_read(&adapter->txs_write_ptr);
 
         return (adapter->txs_next_clear >= txs_write_ptr) ?
                 (int) (adapter->txs_ring_size - adapter->txs_next_clear +
                 txs_write_ptr - 1) :
                 (int) (txs_write_ptr - adapter->txs_next_clear - 1);
 }
 
 static inline int TxdFreeBytes(struct atl2_adapter *adapter)
 {
         u32 txd_read_ptr = (u32)atomic_read(&adapter->txd_read_ptr);
 
         return (adapter->txd_write_ptr >= txd_read_ptr) ?
                 (int) (adapter->txd_ring_size - adapter->txd_write_ptr +
                 txd_read_ptr - 1) :
                 (int) (txd_read_ptr - adapter->txd_write_ptr - 1);
 }
 
 static int atl2_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 {
         struct atl2_adapter *adapter = netdev_priv(netdev);
         struct tx_pkt_header *txph;
         u32 offset, copy_len;
         int txs_unused;
         int txbuf_unused;
 
         if (test_bit(__ATL2_DOWN, &adapter->flags)) {
                 dev_kfree_skb_any(skb);
                 return NETDEV_TX_OK;
         }
 
         if (unlikely(skb->len <= 0)) {
                 dev_kfree_skb_any(skb);
                 return NETDEV_TX_OK;
         }
 
         txs_unused = TxsFreeUnit(adapter);
         txbuf_unused = TxdFreeBytes(adapter);
 
         if (skb->len + sizeof(struct tx_pkt_header) + 4  > txbuf_unused ||
                 txs_unused < 1) {
                 /* not enough resources */
                 netif_stop_queue(netdev);
                 return NETDEV_TX_BUSY;
         }
 
         offset = adapter->txd_write_ptr;
 
         txph = (struct tx_pkt_header *) (((u8 *)adapter->txd_ring) + offset);
 
         *(u32 *)txph = 0;
         txph->pkt_size = skb->len;
 
         offset += 4;
         if (offset >= adapter->txd_ring_size)
                 offset -= adapter->txd_ring_size;
         copy_len = adapter->txd_ring_size - offset;
         if (copy_len >= skb->len) {
                 memcpy(((u8 *)adapter->txd_ring) + offset, skb->data, skb->len);
                 offset += ((u32)(skb->len + 3) & ~3);
         } else {
                 memcpy(((u8 *)adapter->txd_ring)+offset, skb->data, copy_len);
                 memcpy((u8 *)adapter->txd_ring, skb->data+copy_len,
                         skb->len-copy_len);
                 offset = ((u32)(skb->len-copy_len + 3) & ~3);
         }
 #ifdef NETIF_F_HW_VLAN_TX
         if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
                 u16 vlan_tag = vlan_tx_tag_get(skb);
                 vlan_tag = (vlan_tag << 4) |
                         (vlan_tag >> 13) |
                         ((vlan_tag >> 9) & 0x8);
                 txph->ins_vlan = 1;
                 txph->vlan = vlan_tag;
         }
 #endif
         if (offset >= adapter->txd_ring_size)
                 offset -= adapter->txd_ring_size;
         adapter->txd_write_ptr = offset;
 
         /* clear txs before send */
         adapter->txs_ring[adapter->txs_next_clear].update = 0;
         if (++adapter->txs_next_clear == adapter->txs_ring_size)
                 adapter->txs_next_clear = 0;
 
         ATL2_WRITE_REGW(&adapter->hw, REG_MB_TXD_WR_IDX,
                 (adapter->txd_write_ptr >> 2));
 
         mmiowb();
         netdev->trans_start = jiffies;
         dev_kfree_skb_any(skb);
         return NETDEV_TX_OK;
 }
 
 /*
  * atl2_get_stats - Get System Network Statistics
  * @netdev: network interface device structure
  *
  * Returns the address of the device statistics structure.
  * The statistics are actually updated from the timer callback.
  */
 static struct net_device_stats *atl2_get_stats(struct net_device *netdev)
 {
         struct atl2_adapter *adapter = netdev_priv(netdev);
         return &adapter->net_stats;
 }
 
 /*
  * atl2_change_mtu - Change the Maximum Transfer Unit
  * @netdev: network interface device structure
  * @new_mtu: new value for maximum frame size
  *
  * Returns 0 on success, negative on failure
  */
 static int atl2_change_mtu(struct net_device *netdev, int new_mtu)
 {
         struct atl2_adapter *adapter = netdev_priv(netdev);
         struct atl2_hw *hw = &adapter->hw;
 
         if ((new_mtu < 40) || (new_mtu > (ETH_DATA_LEN + VLAN_SIZE)))
                 return -EINVAL;
 
         /* set MTU */
         if (hw->max_frame_size != new_mtu) {
                 netdev->mtu = new_mtu;
                 ATL2_WRITE_REG(hw, REG_MTU, new_mtu + ENET_HEADER_SIZE +
                         VLAN_SIZE + ETHERNET_FCS_SIZE);
         }
 
         return 0;
 }
 
 /*
  * atl2_set_mac - Change the Ethernet Address of the NIC
  * @netdev: network interface device structure
  * @p: pointer to an address structure
  *
  * Returns 0 on success, negative on failure
  */
 static int atl2_set_mac(struct net_device *netdev, void *p)
 {
         struct atl2_adapter *adapter = netdev_priv(netdev);
         struct sockaddr *addr = p;
 
         if (!is_valid_ether_addr(addr->sa_data))
                 return -EADDRNOTAVAIL;
 
         if (netif_running(netdev))
                 return -EBUSY;
 
         memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
         memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
 
         atl2_set_mac_addr(&adapter->hw);
 
         return 0;
 }
 
 /*
  * atl2_mii_ioctl -
  * @netdev:
  * @ifreq:
  * @cmd:
  */
 static int atl2_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 {
         struct atl2_adapter *adapter = netdev_priv(netdev);
         struct mii_ioctl_data *data = if_mii(ifr);
         unsigned long flags;
 
         switch (cmd) {
         case SIOCGMIIPHY:
                 data->phy_id = 0;
                 break;
         case SIOCGMIIREG:
                 if (!capable(CAP_NET_ADMIN))
                         return -EPERM;
                 spin_lock_irqsave(&adapter->stats_lock, flags);
                 if (atl2_read_phy_reg(&adapter->hw,
                         data->reg_num & 0x1F, &data->val_out)) {
                         spin_unlock_irqrestore(&adapter->stats_lock, flags);
                         return -EIO;
                 }
                 spin_unlock_irqrestore(&adapter->stats_lock, flags);
                 break;
         case SIOCSMIIREG:
                 if (!capable(CAP_NET_ADMIN))
                         return -EPERM;
                 if (data->reg_num & ~(0x1F))
                         return -EFAULT;
                 spin_lock_irqsave(&adapter->stats_lock, flags);
                 if (atl2_write_phy_reg(&adapter->hw, data->reg_num,
                        data->val_in)) {
                        spin_unlock_irqrestore(&adapter->stats_lock, flags);
                        return -EIO;
                }
                spin_unlock_irqrestore(&adapter->stats_lock, flags);
                break;
        default:
                return -EOPNOTSUPP;
        }
        return 0;
}

/*
 * atl2_ioctl -
 * @netdev:
 * @ifreq:
 * @cmd:
 */
static int atl2_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
        switch (cmd) {
        case SIOCGMIIPHY:
        case SIOCGMIIREG:
        case SIOCSMIIREG:
                return atl2_mii_ioctl(netdev, ifr, cmd);
#ifdef ETHTOOL_OPS_COMPAT
        case SIOCETHTOOL:
                return ethtool_ioctl(ifr);
#endif
        default:
                return -EOPNOTSUPP;
        }
}

/*
 * atl2_tx_timeout - Respond to a Tx Hang
 * @netdev: network interface device structure
 */
static void atl2_tx_timeout(struct net_device *netdev)
{
        struct atl2_adapter *adapter = netdev_priv(netdev);

        /* Do the reset outside of interrupt context */
        schedule_work(&adapter->reset_task);
}

/*
 * atl2_watchdog - Timer Call-back
 * @data: pointer to netdev cast into an unsigned long
 */
static void atl2_watchdog(unsigned long data)
{
        struct atl2_adapter *adapter = (struct atl2_adapter *) data;
        u32 drop_rxd, drop_rxs;
        unsigned long flags;

        if (!test_bit(__ATL2_DOWN, &adapter->flags)) {
                spin_lock_irqsave(&adapter->stats_lock, flags);
                drop_rxd = ATL2_READ_REG(&adapter->hw, REG_STS_RXD_OV);
                drop_rxs = ATL2_READ_REG(&adapter->hw, REG_STS_RXS_OV);
                adapter->net_stats.rx_over_errors += (drop_rxd+drop_rxs);
                spin_unlock_irqrestore(&adapter->stats_lock, flags);

                /* Reset the timer */
                mod_timer(&adapter->watchdog_timer, jiffies + 4 * HZ);
        }
}

/*
 * atl2_phy_config - Timer Call-back
 * @data: pointer to netdev cast into an unsigned long
 */
static void atl2_phy_config(unsigned long data)
{
        struct atl2_adapter *adapter = (struct atl2_adapter *) data;
        struct atl2_hw *hw = &adapter->hw;
        unsigned long flags;

        spin_lock_irqsave(&adapter->stats_lock, flags);
        atl2_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
        atl2_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN |
                MII_CR_RESTART_AUTO_NEG);
        spin_unlock_irqrestore(&adapter->stats_lock, flags);
        clear_bit(0, &adapter->cfg_phy);
}

static int atl2_up(struct atl2_adapter *adapter)
{
        struct net_device *netdev = adapter->netdev;
        int err = 0;
        u32 val;

        /* hardware has been reset, we need to reload some things */

        err = atl2_init_hw(&adapter->hw);
        if (err) {
                err = -EIO;
                return err;
        }

        atl2_set_multi(netdev);
        init_ring_ptrs(adapter);

#ifdef NETIF_F_HW_VLAN_TX
        atl2_restore_vlan(adapter);
#endif

        if (atl2_configure(adapter)) {
                err = -EIO;
                goto err_up;
        }

        clear_bit(__ATL2_DOWN, &adapter->flags);

        val = ATL2_READ_REG(&adapter->hw, REG_MASTER_CTRL);
        ATL2_WRITE_REG(&adapter->hw, REG_MASTER_CTRL, val |
                MASTER_CTRL_MANUAL_INT);

        atl2_irq_enable(adapter);

err_up:
        return err;
}

static void atl2_reinit_locked(struct atl2_adapter *adapter)
{
        WARN_ON(in_interrupt());
        while (test_and_set_bit(__ATL2_RESETTING, &adapter->flags))
                msleep(1);
        atl2_down(adapter);
        atl2_up(adapter);
        clear_bit(__ATL2_RESETTING, &adapter->flags);
}

static void atl2_reset_task(struct work_struct *work)
{
        struct atl2_adapter *adapter;
        adapter = container_of(work, struct atl2_adapter, reset_task);

        atl2_reinit_locked(adapter);
}

static void atl2_setup_mac_ctrl(struct atl2_adapter *adapter)
{
        u32 value;
        struct atl2_hw *hw = &adapter->hw;
        struct net_device *netdev = adapter->netdev;

        /* Config MAC CTRL Register */
        value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN | MAC_CTRL_MACLP_CLK_PHY;

        /* duplex */
        if (FULL_DUPLEX == adapter->link_duplex)
                value |= MAC_CTRL_DUPLX;

        /* flow control */
        value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);

        /* PAD & CRC */
        value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);

        /* preamble length */
        value |= (((u32)adapter->hw.preamble_len & MAC_CTRL_PRMLEN_MASK) <<
                MAC_CTRL_PRMLEN_SHIFT);

        /* vlan */
        if (adapter->vlgrp)
                value |= MAC_CTRL_RMV_VLAN;

        /* filter mode */
        value |= MAC_CTRL_BC_EN;
        if (netdev->flags & IFF_PROMISC)
                value |= MAC_CTRL_PROMIS_EN;
        else if (netdev->flags & IFF_ALLMULTI)
                value |= MAC_CTRL_MC_ALL_EN;

        /* half retry buffer */
        value |= (((u32)(adapter->hw.retry_buf &
                MAC_CTRL_HALF_LEFT_BUF_MASK)) << MAC_CTRL_HALF_LEFT_BUF_SHIFT);

        ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);
}

static int atl2_check_link(struct atl2_adapter *adapter)
{
        struct atl2_hw *hw = &adapter->hw;
        struct net_device *netdev = adapter->netdev;
        int ret_val;
        u16 speed, duplex, phy_data;
        int reconfig = 0;

        /* MII_BMSR must read twise */
        atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
        atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
        if (!(phy_data&BMSR_LSTATUS)) { /* link down */
                if (netif_carrier_ok(netdev)) { /* old link state: Up */
                        u32 value;
                        /* disable rx */
                        value = ATL2_READ_REG(hw, REG_MAC_CTRL);
                        value &= ~MAC_CTRL_RX_EN;
                        ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);
                        adapter->link_speed = SPEED_0;
                        netif_carrier_off(netdev);
                        netif_stop_queue(netdev);
                }
                return 0;
        }

        /* Link Up */
        ret_val = atl2_get_speed_and_duplex(hw, &speed, &duplex);
        if (ret_val)
                return ret_val;
        switch (hw->MediaType) {
        case MEDIA_TYPE_100M_FULL:
                if (speed  != SPEED_100 || duplex != FULL_DUPLEX)
                        reconfig = 1;
                break;
        case MEDIA_TYPE_100M_HALF:
                if (speed  != SPEED_100 || duplex != HALF_DUPLEX)
                        reconfig = 1;
                break;
        case MEDIA_TYPE_10M_FULL:
                if (speed != SPEED_10 || duplex != FULL_DUPLEX)
                        reconfig = 1;
                break;
        case MEDIA_TYPE_10M_HALF:
                if (speed  != SPEED_10 || duplex != HALF_DUPLEX)
                        reconfig = 1;
                break;
        }
        /* link result is our setting */
        if (reconfig == 0) {
                if (adapter->link_speed != speed ||
                        adapter->link_duplex != duplex) {
                        adapter->link_speed = speed;
                        adapter->link_duplex = duplex;
                        atl2_setup_mac_ctrl(adapter);
                        printk(KERN_INFO "%s: %s NIC Link is Up<%d Mbps %s>\n",
                                atl2_driver_name, netdev->name,
                                adapter->link_speed,
                                adapter->link_duplex == FULL_DUPLEX ?
                                        "Full Duplex" : "Half Duplex");
                }

                if (!netif_carrier_ok(netdev)) { /* Link down -> Up */
                        netif_carrier_on(netdev);
                        netif_wake_queue(netdev);
                }
                return 0;
        }

        /* change original link status */
        if (netif_carrier_ok(netdev)) {
                u32 value;
                /* disable rx */
                value = ATL2_READ_REG(hw, REG_MAC_CTRL);
                value &= ~MAC_CTRL_RX_EN;
                ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);

                adapter->link_speed = SPEED_0;
                netif_carrier_off(netdev);
                netif_stop_queue(netdev);
        }

        /* auto-neg, insert timer to re-config phy
         * (if interval smaller than 5 seconds, something strange) */
        if (!test_bit(__ATL2_DOWN, &adapter->flags)) {
                if (!test_and_set_bit(0, &adapter->cfg_phy))
                        mod_timer(&adapter->phy_config_timer, jiffies + 5 * HZ);
        }

        return 0;
}

/*
 * atl2_link_chg_task - deal with link change event Out of interrupt context
 * @netdev: network interface device structure
 */
static void atl2_link_chg_task(struct work_struct *work)
{
        struct atl2_adapter *adapter;
        unsigned long flags;

        adapter = container_of(work, struct atl2_adapter, link_chg_task);

        spin_lock_irqsave(&adapter->stats_lock, flags);
        atl2_check_link(adapter);
        spin_unlock_irqrestore(&adapter->stats_lock, flags);
}

static void atl2_setup_pcicmd(struct pci_dev *pdev)
{
        u16 cmd;

        pci_read_config_word(pdev, PCI_COMMAND, &cmd);

        if (cmd & PCI_COMMAND_INTX_DISABLE)
                cmd &= ~PCI_COMMAND_INTX_DISABLE;
        if (cmd & PCI_COMMAND_IO)
                cmd &= ~PCI_COMMAND_IO;
        if (0 == (cmd & PCI_COMMAND_MEMORY))
                cmd |= PCI_COMMAND_MEMORY;
        if (0 == (cmd & PCI_COMMAND_MASTER))
                cmd |= PCI_COMMAND_MASTER;
        pci_write_config_word(pdev, PCI_COMMAND, cmd);

        /*
         * some motherboards BIOS(PXE/EFI) driver may set PME
         * while they transfer control to OS (Windows/Linux)
         * so we should clear this bit before NIC work normally
         */
        pci_write_config_dword(pdev, REG_PM_CTRLSTAT, 0);
}

#ifdef CONFIG_NET_POLL_CONTROLLER
static void atl2_poll_controller(struct net_device *netdev)
{
        disable_irq(netdev->irq);
        atl2_intr(netdev->irq, netdev);
        enable_irq(netdev->irq);
}
#endif

/*
 * atl2_probe - Device Initialization Routine
 * @pdev: PCI device information struct
 * @ent: entry in atl2_pci_tbl
 *
 * Returns 0 on success, negative on failure
 *
 * atl2_probe initializes an adapter identified by a pci_dev structure.
 * The OS initialization, configuring of the adapter private structure,
 * and a hardware reset occur.
 */
static int __devinit atl2_probe(struct pci_dev *pdev,
        const struct pci_device_id *ent)
{
        struct net_device *netdev;
        struct atl2_adapter *adapter;
        static int cards_found;
        unsigned long mmio_start;
        int mmio_len;
        int err;

        cards_found = 0;

        err = pci_enable_device(pdev);
        if (err)
                return err;

        /*
         * atl2 is a shared-high-32-bit device, so we're stuck with 32-bit DMA
         * until the kernel has the proper infrastructure to support 64-bit DMA
         * on these devices.
         */
        if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) &&
                pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
                printk(KERN_ERR "atl2: No usable DMA configuration, aborting\n");
                goto err_dma;
        }

        /* Mark all PCI regions associated with PCI device
         * pdev as being reserved by owner atl2_driver_name */
        err = pci_request_regions(pdev, atl2_driver_name);
        if (err)
                goto err_pci_reg;

        /* Enables bus-mastering on the device and calls
         * pcibios_set_master to do the needed arch specific settings */
        pci_set_master(pdev);

        err = -ENOMEM;
        netdev = alloc_etherdev(sizeof(struct atl2_adapter));
        if (!netdev)
                goto err_alloc_etherdev;

        SET_NETDEV_DEV(netdev, &pdev->dev);

        pci_set_drvdata(pdev, netdev);
        adapter = netdev_priv(netdev);
        adapter->netdev = netdev;
        adapter->pdev = pdev;
        adapter->hw.back = adapter;

        mmio_start = pci_resource_start(pdev, 0x0);
        mmio_len = pci_resource_len(pdev, 0x0);

        adapter->hw.mem_rang = (u32)mmio_len;
        adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
        if (!adapter->hw.hw_addr) {
                err = -EIO;
                goto err_ioremap;
        }

        atl2_setup_pcicmd(pdev);

        netdev->open = &atl2_open;
        netdev->stop = &atl2_close;
        netdev->hard_start_xmit = &atl2_xmit_frame;
        netdev->get_stats = &atl2_get_stats;
        netdev->set_multicast_list = &atl2_set_multi;
        netdev->set_mac_address = &atl2_set_mac;
        netdev->change_mtu = &atl2_change_mtu;
        netdev->do_ioctl = &atl2_ioctl;
        atl2_set_ethtool_ops(netdev);

#ifdef CONFIG_NET_POLL_CONTROLLER
        netdev->poll_controller = atl2_poll_controller;
#endif
#ifdef HAVE_TX_TIMEOUT
        netdev->tx_timeout = &atl2_tx_timeout;
        netdev->watchdog_timeo = 5 * HZ;
#endif
#ifdef NETIF_F_HW_VLAN_TX
        netdev->vlan_rx_register = atl2_vlan_rx_register;
#endif
        strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);

        netdev->mem_start = mmio_start;
        netdev->mem_end = mmio_start + mmio_len;
        adapter->bd_number = cards_found;
        adapter->pci_using_64 = false;

        /* setup the private structure */
        err = atl2_sw_init(adapter);
        if (err)
                goto err_sw_init;

        err = -EIO;

#ifdef NETIF_F_HW_VLAN_TX
        netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
#endif

        /* Init PHY as early as possible due to power saving issue  */
        atl2_phy_init(&adapter->hw);

        /* reset the controller to
         * put the device in a known good starting state */

        if (atl2_reset_hw(&adapter->hw)) {
                err = -EIO;
                goto err_reset;
        }

        /* copy the MAC address out of the EEPROM */
        atl2_read_mac_addr(&adapter->hw);
        memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
/* FIXME: do we still need this? */
#ifdef ETHTOOL_GPERMADDR
        memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);

        if (!is_valid_ether_addr(netdev->perm_addr)) {
#else
        if (!is_valid_ether_addr(netdev->dev_addr)) {
#endif
                err = -EIO;
                goto err_eeprom;
        }

        atl2_check_options(adapter);

        init_timer(&adapter->watchdog_timer);
        adapter->watchdog_timer.function = &atl2_watchdog;
        adapter->watchdog_timer.data = (unsigned long) adapter;

        init_timer(&adapter->phy_config_timer);
        adapter->phy_config_timer.function = &atl2_phy_config;
        adapter->phy_config_timer.data = (unsigned long) adapter;

        INIT_WORK(&adapter->reset_task, atl2_reset_task);
        INIT_WORK(&adapter->link_chg_task, atl2_link_chg_task);

        strcpy(netdev->name, "eth%d"); /* ?? */
        err = register_netdev(netdev);
        if (err)
                goto err_register;

        /* assume we have no link for now */
        netif_carrier_off(netdev);
        netif_stop_queue(netdev);

        cards_found++;

        return 0;

err_reset:
err_register:
err_sw_init:
err_eeprom:
        iounmap(adapter->hw.hw_addr);
err_ioremap:
        free_netdev(netdev);
err_alloc_etherdev:
        pci_release_regions(pdev);
err_pci_reg:
err_dma:
        pci_disable_device(pdev);
        return err;
}

/*
 * atl2_remove - Device Removal Routine
 * @pdev: PCI device information struct
 *
 * atl2_remove is called by the PCI subsystem to alert the driver
 * that it should release a PCI device.  The could be caused by a
 * Hot-Plug event, or because the driver is going to be removed from
 * memory.
 */
/* FIXME: write the original MAC address back in case it was changed from a
 * BIOS-set value, as in atl1 -- CHS */
static void __devexit atl2_remove(struct pci_dev *pdev)
{
        struct net_device *netdev = pci_get_drvdata(pdev);
        struct atl2_adapter *adapter = netdev_priv(netdev);

        /* flush_scheduled work may reschedule our watchdog task, so
         * explicitly disable watchdog tasks from being rescheduled  */
        set_bit(__ATL2_DOWN, &adapter->flags);

        del_timer_sync(&adapter->watchdog_timer);
        del_timer_sync(&adapter->phy_config_timer);

        flush_scheduled_work();

        unregister_netdev(netdev);

        atl2_force_ps(&adapter->hw);

        iounmap(adapter->hw.hw_addr);
        pci_release_regions(pdev);

        free_netdev(netdev);

        pci_disable_device(pdev);
}

static int atl2_suspend(struct pci_dev *pdev, pm_message_t state)
{
        struct net_device *netdev = pci_get_drvdata(pdev);
        struct atl2_adapter *adapter = netdev_priv(netdev);
        struct atl2_hw *hw = &adapter->hw;
        u16 speed, duplex;
        u32 ctrl = 0;
        u32 wufc = adapter->wol;

#ifdef CONFIG_PM
        int retval = 0;
#endif

        netif_device_detach(netdev);

        if (netif_running(netdev)) {
                WARN_ON(test_bit(__ATL2_RESETTING, &adapter->flags));
                atl2_down(adapter);
        }

#ifdef CONFIG_PM
        retval = pci_save_state(pdev);
        if (retval)
                return retval;
#endif

        atl2_read_phy_reg(hw, MII_BMSR, (u16 *)&ctrl);
        atl2_read_phy_reg(hw, MII_BMSR, (u16 *)&ctrl);
        if (ctrl & BMSR_LSTATUS)
                wufc &= ~ATLX_WUFC_LNKC;

        if (0 != (ctrl & BMSR_LSTATUS) && 0 != wufc) {
                u32 ret_val;
                /* get current link speed & duplex */
                ret_val = atl2_get_speed_and_duplex(hw, &speed, &duplex);
                if (ret_val) {
                        printk(KERN_DEBUG
                                "%s: get speed&duplex error while suspend\n",
                                atl2_driver_name);
                        goto wol_dis;
                }

                ctrl = 0;

                /* turn on magic packet wol */
                if (wufc & ATLX_WUFC_MAG)
                        ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN);

                /* ignore Link Chg event when Link is up */
                ATL2_WRITE_REG(hw, REG_WOL_CTRL, ctrl);

                /* Config MAC CTRL Register */
                ctrl = MAC_CTRL_RX_EN | MAC_CTRL_MACLP_CLK_PHY;
                if (FULL_DUPLEX == adapter->link_duplex)
                        ctrl |= MAC_CTRL_DUPLX;
                ctrl |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
                ctrl |= (((u32)adapter->hw.preamble_len &
                        MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
                ctrl |= (((u32)(adapter->hw.retry_buf &
                        MAC_CTRL_HALF_LEFT_BUF_MASK)) <<
                        MAC_CTRL_HALF_LEFT_BUF_SHIFT);
                if (wufc & ATLX_WUFC_MAG) {
                        /* magic packet maybe Broadcast&multicast&Unicast */
                        ctrl |= MAC_CTRL_BC_EN;
                }

                ATL2_WRITE_REG(hw, REG_MAC_CTRL, ctrl);

                /* pcie patch */
                ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
                ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
                ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
                ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
                ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
                ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);

                pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
                goto suspend_exit;
        }

        if (0 == (ctrl&BMSR_LSTATUS) && 0 != (wufc&ATLX_WUFC_LNKC)) {
                /* link is down, so only LINK CHG WOL event enable */
                ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
                ATL2_WRITE_REG(hw, REG_WOL_CTRL, ctrl);
                ATL2_WRITE_REG(hw, REG_MAC_CTRL, 0);

                /* pcie patch */
                ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
                ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
                ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
                ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
                ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
                ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);

                hw->phy_configured = false; /* re-init PHY when resume */

                pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);

                goto suspend_exit;
        }

wol_dis:
        /* WOL disabled */
        ATL2_WRITE_REG(hw, REG_WOL_CTRL, 0);

        /* pcie patch */
        ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
        ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
        ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
        ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
        ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
        ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);

        atl2_force_ps(hw);
        hw->phy_configured = false; /* re-init PHY when resume */

        pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);

suspend_exit:
        if (netif_running(netdev))
                atl2_free_irq(adapter);

        pci_disable_device(pdev);

        pci_set_power_state(pdev, pci_choose_state(pdev, state));

        return 0;
}

#ifdef CONFIG_PM
static int atl2_resume(struct pci_dev *pdev)
{
        struct net_device *netdev = pci_get_drvdata(pdev);
        struct atl2_adapter *adapter = netdev_priv(netdev);
        u32 err;

        pci_set_power_state(pdev, PCI_D0);
        pci_restore_state(pdev);

        err = pci_enable_device(pdev);
        if (err) {
                printk(KERN_ERR
                        "atl2: Cannot enable PCI device from suspend\n");
                return err;
        }

        pci_set_master(pdev);

        ATL2_READ_REG(&adapter->hw, REG_WOL_CTRL); /* clear WOL status */

        pci_enable_wake(pdev, PCI_D3hot, 0);
        pci_enable_wake(pdev, PCI_D3cold, 0);

        ATL2_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);

        if (netif_running(netdev)) {
                err = atl2_request_irq(adapter);
                if (err)
                        return err;
        }

        atl2_reset_hw(&adapter->hw);

        if (netif_running(netdev))
                atl2_up(adapter);

        netif_device_attach(netdev);

        return 0;
}
#endif

static void atl2_shutdown(struct pci_dev *pdev)
{
        atl2_suspend(pdev, PMSG_SUSPEND);
}

static struct pci_driver atl2_driver = {
        .name     = atl2_driver_name,
        .id_table = atl2_pci_tbl,
        .probe    = atl2_probe,
        .remove   = __devexit_p(atl2_remove),
        /* Power Managment Hooks */
        .suspend  = atl2_suspend,
#ifdef CONFIG_PM
        .resume   = atl2_resume,
#endif
        .shutdown = atl2_shutdown,
};

/*
 * atl2_init_module - Driver Registration Routine
 *
 * atl2_init_module is the first routine called when the driver is
 * loaded. All it does is register with the PCI subsystem.
 */
static int __init atl2_init_module(void)
{
        printk(KERN_INFO "%s - version %s\n", atl2_driver_string,
                atl2_driver_version);
        printk(KERN_INFO "%s\n", atl2_copyright);
        return pci_register_driver(&atl2_driver);
}
module_init(atl2_init_module);

/*
 * atl2_exit_module - Driver Exit Cleanup Routine
 *
 * atl2_exit_module is called just before the driver is removed
 * from memory.
 */
static void __exit atl2_exit_module(void)
{
        pci_unregister_driver(&atl2_driver);
}
module_exit(atl2_exit_module);

static void atl2_read_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value)
{
        struct atl2_adapter *adapter = hw->back;
        pci_read_config_word(adapter->pdev, reg, value);
}

static void atl2_write_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value)
{
        struct atl2_adapter *adapter = hw->back;
        pci_write_config_word(adapter->pdev, reg, *value);
}

static int atl2_get_settings(struct net_device *netdev,
        struct ethtool_cmd *ecmd)
{
        struct atl2_adapter *adapter = netdev_priv(netdev);
        struct atl2_hw *hw = &adapter->hw;

        ecmd->supported = (SUPPORTED_10baseT_Half |
                SUPPORTED_10baseT_Full |
                SUPPORTED_100baseT_Half |
                SUPPORTED_100baseT_Full |
                SUPPORTED_Autoneg |
                SUPPORTED_TP);
        ecmd->advertising = ADVERTISED_TP;

        ecmd->advertising |= ADVERTISED_Autoneg;
        ecmd->advertising |= hw->autoneg_advertised;

        ecmd->port = PORT_TP;
        ecmd->phy_address = 0;
        ecmd->transceiver = XCVR_INTERNAL;

        if (adapter->link_speed != SPEED_0) {
                ecmd->speed = adapter->link_speed;
                if (adapter->link_duplex == FULL_DUPLEX)
                        ecmd->duplex = DUPLEX_FULL;
                else
                        ecmd->duplex = DUPLEX_HALF;
        } else {
                ecmd->speed = -1;
                ecmd->duplex = -1;
        }

        ecmd->autoneg = AUTONEG_ENABLE;
        return 0;
}

static int atl2_set_settings(struct net_device *netdev,
        struct ethtool_cmd *ecmd)
{
        struct atl2_adapter *adapter = netdev_priv(netdev);
        struct atl2_hw *hw = &adapter->hw;

        while (test_and_set_bit(__ATL2_RESETTING, &adapter->flags))
                msleep(1);

        if (ecmd->autoneg == AUTONEG_ENABLE) {
#define MY_ADV_MASK        (ADVERTISE_10_HALF | \
                         ADVERTISE_10_FULL | \
                         ADVERTISE_100_HALF| \
                         ADVERTISE_100_FULL)

                if ((ecmd->advertising & MY_ADV_MASK) == MY_ADV_MASK) {
                        hw->MediaType = MEDIA_TYPE_AUTO_SENSOR;
                        hw->autoneg_advertised =  MY_ADV_MASK;
                } else if ((ecmd->advertising & MY_ADV_MASK) ==
                                ADVERTISE_100_FULL) {
                        hw->MediaType = MEDIA_TYPE_100M_FULL;
                        hw->autoneg_advertised = ADVERTISE_100_FULL;
                } else if ((ecmd->advertising & MY_ADV_MASK) ==
                                ADVERTISE_100_HALF) {
                        hw->MediaType = MEDIA_TYPE_100M_HALF;
                        hw->autoneg_advertised = ADVERTISE_100_HALF;
                } else if ((ecmd->advertising & MY_ADV_MASK) ==
                                ADVERTISE_10_FULL) {
                        hw->MediaType = MEDIA_TYPE_10M_FULL;
                        hw->autoneg_advertised = ADVERTISE_10_FULL;
                }  else if ((ecmd->advertising & MY_ADV_MASK) ==
                                ADVERTISE_10_HALF) {
                        hw->MediaType = MEDIA_TYPE_10M_HALF;
                        hw->autoneg_advertised = ADVERTISE_10_HALF;
                } else {
                        clear_bit(__ATL2_RESETTING, &adapter->flags);
                        return -EINVAL;
                }
                ecmd->advertising = hw->autoneg_advertised |
                        ADVERTISED_TP | ADVERTISED_Autoneg;
        } else {
                clear_bit(__ATL2_RESETTING, &adapter->flags);
                return -EINVAL;
        }

        /* reset the link */
        if (netif_running(adapter->netdev)) {
                atl2_down(adapter);
                atl2_up(adapter);
        } else
                atl2_reset_hw(&adapter->hw);

        clear_bit(__ATL2_RESETTING, &adapter->flags);
        return 0;
}

static u32 atl2_get_tx_csum(struct net_device *netdev)
{
        return (netdev->features & NETIF_F_HW_CSUM) != 0;
}

static u32 atl2_get_msglevel(struct net_device *netdev)
{
        return 0;
}

/*
 * It's sane for this to be empty, but we might want to take advantage of this.
 */
static void atl2_set_msglevel(struct net_device *netdev, u32 data)
{
}

static int atl2_get_regs_len(struct net_device *netdev)
{
#define ATL2_REGS_LEN 42
        return sizeof(u32) * ATL2_REGS_LEN;
}

static void atl2_get_regs(struct net_device *netdev,
        struct ethtool_regs *regs, void *p)
{
        struct atl2_adapter *adapter = netdev_priv(netdev);
        struct atl2_hw *hw = &adapter->hw;
        u32 *regs_buff = p;
        u16 phy_data;

        memset(p, 0, sizeof(u32) * ATL2_REGS_LEN);

        regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;

        regs_buff[0]  = ATL2_READ_REG(hw, REG_VPD_CAP);
        regs_buff[1]  = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
        regs_buff[2]  = ATL2_READ_REG(hw, REG_SPI_FLASH_CONFIG);
        regs_buff[3]  = ATL2_READ_REG(hw, REG_TWSI_CTRL);
        regs_buff[4]  = ATL2_READ_REG(hw, REG_PCIE_DEV_MISC_CTRL);
        regs_buff[5]  = ATL2_READ_REG(hw, REG_MASTER_CTRL);
        regs_buff[6]  = ATL2_READ_REG(hw, REG_MANUAL_TIMER_INIT);
        regs_buff[7]  = ATL2_READ_REG(hw, REG_IRQ_MODU_TIMER_INIT);
        regs_buff[8]  = ATL2_READ_REG(hw, REG_PHY_ENABLE);
        regs_buff[9]  = ATL2_READ_REG(hw, REG_CMBDISDMA_TIMER);
        regs_buff[10] = ATL2_READ_REG(hw, REG_IDLE_STATUS);
        regs_buff[11] = ATL2_READ_REG(hw, REG_MDIO_CTRL);
        regs_buff[12] = ATL2_READ_REG(hw, REG_SERDES_LOCK);
        regs_buff[13] = ATL2_READ_REG(hw, REG_MAC_CTRL);
        regs_buff[14] = ATL2_READ_REG(hw, REG_MAC_IPG_IFG);
        regs_buff[15] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR);
        regs_buff[16] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR+4);
        regs_buff[17] = ATL2_READ_REG(hw, REG_RX_HASH_TABLE);
        regs_buff[18] = ATL2_READ_REG(hw, REG_RX_HASH_TABLE+4);
        regs_buff[19] = ATL2_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL);
        regs_buff[20] = ATL2_READ_REG(hw, REG_MTU);
        regs_buff[21] = ATL2_READ_REG(hw, REG_WOL_CTRL);
        regs_buff[22] = ATL2_READ_REG(hw, REG_SRAM_TXRAM_END);
        regs_buff[23] = ATL2_READ_REG(hw, REG_DESC_BASE_ADDR_HI);
        regs_buff[24] = ATL2_READ_REG(hw, REG_TXD_BASE_ADDR_LO);
        regs_buff[25] = ATL2_READ_REG(hw, REG_TXD_MEM_SIZE);
        regs_buff[26] = ATL2_READ_REG(hw, REG_TXS_BASE_ADDR_LO);
        regs_buff[27] = ATL2_READ_REG(hw, REG_TXS_MEM_SIZE);
        regs_buff[28] = ATL2_READ_REG(hw, REG_RXD_BASE_ADDR_LO);
        regs_buff[29] = ATL2_READ_REG(hw, REG_RXD_BUF_NUM);
        regs_buff[30] = ATL2_READ_REG(hw, REG_DMAR);
        regs_buff[31] = ATL2_READ_REG(hw, REG_TX_CUT_THRESH);
        regs_buff[32] = ATL2_READ_REG(hw, REG_DMAW);
        regs_buff[33] = ATL2_READ_REG(hw, REG_PAUSE_ON_TH);
        regs_buff[34] = ATL2_READ_REG(hw, REG_PAUSE_OFF_TH);
        regs_buff[35] = ATL2_READ_REG(hw, REG_MB_TXD_WR_IDX);
        regs_buff[36] = ATL2_READ_REG(hw, REG_MB_RXD_RD_IDX);
        regs_buff[38] = ATL2_READ_REG(hw, REG_ISR);
        regs_buff[39] = ATL2_READ_REG(hw, REG_IMR);

        atl2_read_phy_reg(hw, MII_BMCR, &phy_data);
        regs_buff[40] = (u32)phy_data;
        atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
        regs_buff[41] = (u32)phy_data;
}

static int atl2_get_eeprom_len(struct net_device *netdev)
{
        struct atl2_adapter *adapter = netdev_priv(netdev);

        if (!atl2_check_eeprom_exist(&adapter->hw))
                return 512;
        else
                return 0;
}

static int atl2_get_eeprom(struct net_device *netdev,
        struct ethtool_eeprom *eeprom, u8 *bytes)
{
        struct atl2_adapter *adapter = netdev_priv(netdev);
        struct atl2_hw *hw = &adapter->hw;
        u32 *eeprom_buff;
        int first_dword, last_dword;
        int ret_val = 0;
        int i;

        if (eeprom->len == 0)
                return -EINVAL;

        if (atl2_check_eeprom_exist(hw))
                return -EINVAL;

        eeprom->magic = hw->vendor_id | (hw->device_id << 16);

        first_dword = eeprom->offset >> 2;
        last_dword = (eeprom->offset + eeprom->len - 1) >> 2;

        eeprom_buff = kmalloc(sizeof(u32) * (last_dword - first_dword + 1),
                GFP_KERNEL);
        if (!eeprom_buff)
                return -ENOMEM;

        for (i = first_dword; i < last_dword; i++) {
                if (!atl2_read_eeprom(hw, i*4, &(eeprom_buff[i-first_dword])))
                        return -EIO;
        }

        memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3),
                eeprom->len);
        kfree(eeprom_buff);

        return ret_val;
}

static int atl2_set_eeprom(struct net_device *netdev,
        struct ethtool_eeprom *eeprom, u8 *bytes)
{
        struct atl2_adapter *adapter = netdev_priv(netdev);
        struct atl2_hw *hw = &adapter->hw;
        u32 *eeprom_buff;
        u32 *ptr;
        int max_len, first_dword, last_dword, ret_val = 0;
        int i;

        if (eeprom->len == 0)
                return -EOPNOTSUPP;

        if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
                return -EFAULT;

        max_len = 512;

        first_dword = eeprom->offset >> 2;
        last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
        eeprom_buff = kmalloc(max_len, GFP_KERNEL);
        if (!eeprom_buff)
                return -ENOMEM;

        ptr = (u32 *)eeprom_buff;

        if (eeprom->offset & 3) {
                /* need read/modify/write of first changed EEPROM word */
                /* only the second byte of the word is being modified */
                if (!atl2_read_eeprom(hw, first_dword*4, &(eeprom_buff[0])))
                        return -EIO;
                ptr++;
        }
        if (((eeprom->offset + eeprom->len) & 3)) {
                /*
                 * need read/modify/write of last changed EEPROM word
                 * only the first byte of the word is being modified
                 */
                if (!atl2_read_eeprom(hw, last_dword * 4,
                        &(eeprom_buff[last_dword - first_dword])))
                        return -EIO;
        }

        /* Device's eeprom is always little-endian, word addressable */
        memcpy(ptr, bytes, eeprom->len);

        for (i = 0; i < last_dword - first_dword + 1; i++) {
                if (!atl2_write_eeprom(hw, ((first_dword+i)*4), eeprom_buff[i]))
                        return -EIO;
        }

        kfree(eeprom_buff);
        return ret_val;
}

static void atl2_get_drvinfo(struct net_device *netdev,
        struct ethtool_drvinfo *drvinfo)
{
        struct atl2_adapter *adapter = netdev_priv(netdev);

        strncpy(drvinfo->driver,  atl2_driver_name, 32);
        strncpy(drvinfo->version, atl2_driver_version, 32);
        strncpy(drvinfo->fw_version, "L2", 32);
        strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
        drvinfo->n_stats = 0;
        drvinfo->testinfo_len = 0;
        drvinfo->regdump_len = atl2_get_regs_len(netdev);
        drvinfo->eedump_len = atl2_get_eeprom_len(netdev);
}

static void atl2_get_wol(struct net_device *netdev,
        struct ethtool_wolinfo *wol)
{
        struct atl2_adapter *adapter = netdev_priv(netdev);

        wol->supported = WAKE_MAGIC;
        wol->wolopts = 0;

        if (adapter->wol & ATLX_WUFC_EX)
                wol->wolopts |= WAKE_UCAST;
        if (adapter->wol & ATLX_WUFC_MC)
                wol->wolopts |= WAKE_MCAST;
        if (adapter->wol & ATLX_WUFC_BC)
                wol->wolopts |= WAKE_BCAST;
        if (adapter->wol & ATLX_WUFC_MAG)
                wol->wolopts |= WAKE_MAGIC;
        if (adapter->wol & ATLX_WUFC_LNKC)
                wol->wolopts |= WAKE_PHY;
}

static int atl2_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
{
        struct atl2_adapter *adapter = netdev_priv(netdev);

        if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
                return -EOPNOTSUPP;

        if (wol->wolopts & (WAKE_MCAST|WAKE_BCAST|WAKE_MCAST))
                return -EOPNOTSUPP;

        /* these settings will always override what we currently have */
        adapter->wol = 0;

        if (wol->wolopts & WAKE_MAGIC)
                adapter->wol |= ATLX_WUFC_MAG;
        if (wol->wolopts & WAKE_PHY)
                adapter->wol |= ATLX_WUFC_LNKC;

        return 0;
}

static int atl2_nway_reset(struct net_device *netdev)
{
        struct atl2_adapter *adapter = netdev_priv(netdev);
        if (netif_running(netdev))
                atl2_reinit_locked(adapter);
        return 0;
}

static struct ethtool_ops atl2_ethtool_ops = {
        .get_settings                = atl2_get_settings,
        .set_settings                = atl2_set_settings,
        .get_drvinfo                = atl2_get_drvinfo,
        .get_regs_len                = atl2_get_regs_len,
        .get_regs                = atl2_get_regs,
        .get_wol                = atl2_get_wol,
        .set_wol                = atl2_set_wol,
        .get_msglevel                = atl2_get_msglevel,
        .set_msglevel                = atl2_set_msglevel,
        .nway_reset                = atl2_nway_reset,
        .get_link                = ethtool_op_get_link,
        .get_eeprom_len                = atl2_get_eeprom_len,
        .get_eeprom                = atl2_get_eeprom,
        .set_eeprom                = atl2_set_eeprom,
        .get_tx_csum                = atl2_get_tx_csum,
        .get_sg                        = ethtool_op_get_sg,
        .set_sg                        = ethtool_op_set_sg,
#ifdef NETIF_F_TSO
        .get_tso                = ethtool_op_get_tso,
#endif
};

static void atl2_set_ethtool_ops(struct net_device *netdev)
{
        SET_ETHTOOL_OPS(netdev, &atl2_ethtool_ops);
}

#define LBYTESWAP(a)  ((((a) & 0x00ff00ff) << 8) | \
        (((a) & 0xff00ff00) >> 8))
#define LONGSWAP(a)   ((LBYTESWAP(a) << 16) | (LBYTESWAP(a) >> 16))
#define SHORTSWAP(a)  (((a) << 8) | ((a) >> 8))

/*
 * Reset the transmit and receive units; mask and clear all interrupts.
 *
 * hw - Struct containing variables accessed by shared code
 * return : 0  or  idle status (if error)
 */
static s32 atl2_reset_hw(struct atl2_hw *hw)
{
        u32 icr;
        u16 pci_cfg_cmd_word;
        int i;

        /* Workaround for PCI problem when BIOS sets MMRBC incorrectly. */
        atl2_read_pci_cfg(hw, PCI_REG_COMMAND, &pci_cfg_cmd_word);
        if ((pci_cfg_cmd_word &
                (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER)) !=
                (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER)) {
                pci_cfg_cmd_word |=
                        (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER);
                atl2_write_pci_cfg(hw, PCI_REG_COMMAND, &pci_cfg_cmd_word);
        }

        /* Clear Interrupt mask to stop board from generating
         * interrupts & Clear any pending interrupt events
         */
        /* FIXME */
        /* ATL2_WRITE_REG(hw, REG_IMR, 0); */
        /* ATL2_WRITE_REG(hw, REG_ISR, 0xffffffff); */

        /* Issue Soft Reset to the MAC.  This will reset the chip's
         * transmit, receive, DMA.  It will not effect
         * the current PCI configuration.  The global reset bit is self-
         * clearing, and should clear within a microsecond.
         */
        ATL2_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_SOFT_RST);
        wmb();
        msleep(1); /* delay about 1ms */

        /* Wait at least 10ms for All module to be Idle */
        for (i = 0; i < 10; i++) {
                icr = ATL2_READ_REG(hw, REG_IDLE_STATUS);
                if (!icr)
                        break;
                msleep(1); /* delay 1 ms */
                cpu_relax();
        }

        if (icr)
                return icr;

        return 0;
}

#define CUSTOM_SPI_CS_SETUP        2
#define CUSTOM_SPI_CLK_HI          2
#define CUSTOM_SPI_CLK_LO          2
#define CUSTOM_SPI_CS_HOLD         2
#define CUSTOM_SPI_CS_HI           3

static struct atl2_spi_flash_dev flash_table[] =
{
/* MFR    WRSR  READ  PROGRAM WREN  WRDI  RDSR  RDID  SECTOR_ERASE CHIP_ERASE */
{"Atmel", 0x0,  0x03, 0x02,   0x06, 0x04, 0x05, 0x15, 0x52,        0x62 },
{"SST",   0x01, 0x03, 0x02,   0x06, 0x04, 0x05, 0x90, 0x20,        0x60 },
{"ST",    0x01, 0x03, 0x02,   0x06, 0x04, 0x05, 0xAB, 0xD8,        0xC7 },
};

static bool atl2_spi_read(struct atl2_hw *hw, u32 addr, u32 *buf)
{
        int i;
        u32 value;

        ATL2_WRITE_REG(hw, REG_SPI_DATA, 0);
        ATL2_WRITE_REG(hw, REG_SPI_ADDR, addr);

        value = SPI_FLASH_CTRL_WAIT_READY |
                (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
                        SPI_FLASH_CTRL_CS_SETUP_SHIFT |
                (CUSTOM_SPI_CLK_HI & SPI_FLASH_CTRL_CLK_HI_MASK) <<
                        SPI_FLASH_CTRL_CLK_HI_SHIFT |
                (CUSTOM_SPI_CLK_LO & SPI_FLASH_CTRL_CLK_LO_MASK) <<
                        SPI_FLASH_CTRL_CLK_LO_SHIFT |
                (CUSTOM_SPI_CS_HOLD & SPI_FLASH_CTRL_CS_HOLD_MASK) <<
                        SPI_FLASH_CTRL_CS_HOLD_SHIFT |
                (CUSTOM_SPI_CS_HI & SPI_FLASH_CTRL_CS_HI_MASK) <<
                        SPI_FLASH_CTRL_CS_HI_SHIFT |
                (0x1 & SPI_FLASH_CTRL_INS_MASK) << SPI_FLASH_CTRL_INS_SHIFT;

        ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);

        value |= SPI_FLASH_CTRL_START;

        ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);

        for (i = 0; i < 10; i++) {
                msleep(1);
                value = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
                if (!(value & SPI_FLASH_CTRL_START))
                        break;
        }

        if (value & SPI_FLASH_CTRL_START)
                return false;

        *buf = ATL2_READ_REG(hw, REG_SPI_DATA);

        return true;
}

/*
 * get_permanent_address
 * return 0 if get valid mac address,
 */
static int get_permanent_address(struct atl2_hw *hw)
{
        u32 Addr[2];
        u32 i, Control;
        u16 Register;
        u8  EthAddr[NODE_ADDRESS_SIZE];
        bool KeyValid;

        if (is_valid_ether_addr(hw->perm_mac_addr))
                return 0;

        Addr[0] = 0;
        Addr[1] = 0;

        if (!atl2_check_eeprom_exist(hw)) { /* eeprom exists */
                Register = 0;
                KeyValid = false;

                /* Read out all EEPROM content */
                i = 0;
                while (1) {
                        if (atl2_read_eeprom(hw, i + 0x100, &Control)) {
                                if (KeyValid) {
                                        if (Register == REG_MAC_STA_ADDR)
                                                Addr[0] = Control;
                                        else if (Register ==
                                                (REG_MAC_STA_ADDR + 4))
                                                Addr[1] = Control;
                                        KeyValid = false;
                                } else if ((Control & 0xff) == 0x5A) {
                                        KeyValid = true;
                                        Register = (u16) (Control >> 16);
                                } else {
                        /* assume data end while encount an invalid KEYWORD */
                                        break;
                                }
                        } else {
                                break; /* read error */
                        }
                        i += 4;
                }

                *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
                *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *) &Addr[1]);

                if (is_valid_ether_addr(EthAddr)) {
                        memcpy(hw->perm_mac_addr, EthAddr, NODE_ADDRESS_SIZE);
                        return 0;
                }
                return 1;
        }

        /* see if SPI flash exists? */
        Addr[0] = 0;
        Addr[1] = 0;
        Register = 0;
        KeyValid = false;
        i = 0;
        while (1) {
                if (atl2_spi_read(hw, i + 0x1f000, &Control)) {
                        if (KeyValid) {
                                if (Register == REG_MAC_STA_ADDR)
                                        Addr[0] = Control;
                                else if (Register == (REG_MAC_STA_ADDR + 4))
                                        Addr[1] = Control;
                                KeyValid = false;
                        } else if ((Control & 0xff) == 0x5A) {
                                KeyValid = true;
                                Register = (u16) (Control >> 16);
                        } else {
                                break; /* data end */
                        }
                } else {
                        break; /* read error */
                }
                i += 4;
        }

        *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
        *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *)&Addr[1]);
        if (is_valid_ether_addr(EthAddr)) {
                memcpy(hw->perm_mac_addr, EthAddr, NODE_ADDRESS_SIZE);
                return 0;
        }
        /* maybe MAC-address is from BIOS */
        Addr[0] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR);
        Addr[1] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR + 4);
        *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
        *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *) &Addr[1]);

        if (is_valid_ether_addr(EthAddr)) {
                memcpy(hw->perm_mac_addr, EthAddr, NODE_ADDRESS_SIZE);
                return 0;
        }

        return 1;
}

/*
 * Reads the adapter's MAC address from the EEPROM
 *
 * hw - Struct containing variables accessed by shared code
 */
static s32 atl2_read_mac_addr(struct atl2_hw *hw)
{
        u16 i;

        if (get_permanent_address(hw)) {
                /* for test */
                /* FIXME: shouldn't we use random_ether_addr() here? */
                hw->perm_mac_addr[0] = 0x00;
                hw->perm_mac_addr[1] = 0x13;
                hw->perm_mac_addr[2] = 0x74;
                hw->perm_mac_addr[3] = 0x00;
                hw->perm_mac_addr[4] = 0x5c;
                hw->perm_mac_addr[5] = 0x38;
        }

        for (i = 0; i < NODE_ADDRESS_SIZE; i++)
                hw->mac_addr[i] = hw->perm_mac_addr[i];

        return 0;
}

/*
 * Hashes an address to determine its location in the multicast table
 *
 * hw - Struct containing variables accessed by shared code
 * mc_addr - the multicast address to hash
 *
 * atl2_hash_mc_addr
 *  purpose
 *      set hash value for a multicast address
 *      hash calcu processing :
 *          1. calcu 32bit CRC for multicast address
 *          2. reverse crc with MSB to LSB
 */
static u32 atl2_hash_mc_addr(struct atl2_hw *hw, u8 *mc_addr)
{
        u32 crc32, value;
        int i;

        value = 0;
        crc32 = ether_crc_le(6, mc_addr);

        for (i = 0; i < 32; i++)
                value |= (((crc32 >> i) & 1) << (31 - i));

        return value;
}

/*
 * Sets the bit in the multicast table corresponding to the hash value.
 *
 * hw - Struct containing variables accessed by shared code
 * hash_value - Multicast address hash value
 */
static void atl2_hash_set(struct atl2_hw *hw, u32 hash_value)
{
        u32 hash_bit, hash_reg;
        u32 mta;

        /* The HASH Table  is a register array of 2 32-bit registers.
         * It is treated like an array of 64 bits.  We want to set
         * bit BitArray[hash_value]. So we figure out what register
         * the bit is in, read it, OR in the new bit, then write
         * back the new value.  The register is determined by the
         * upper 7 bits of the hash value and the bit within that
         * register are determined by the lower 5 bits of the value.
         */
        hash_reg = (hash_value >> 31) & 0x1;
        hash_bit = (hash_value >> 26) & 0x1F;

        mta = ATL2_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg);

        mta |= (1 << hash_bit);

        ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta);
}

/*
 * atl2_init_pcie - init PCIE module
 */
static void atl2_init_pcie(struct atl2_hw *hw)
{
    u32 value;
    value = LTSSM_TEST_MODE_DEF;
    ATL2_WRITE_REG(hw, REG_LTSSM_TEST_MODE, value);

    value = PCIE_DLL_TX_CTRL1_DEF;
    ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, value);
}

static void atl2_init_flash_opcode(struct atl2_hw *hw)
{
        if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
                hw->flash_vendor = 0; /* ATMEL */

        /* Init OP table */
        ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_PROGRAM,
                flash_table[hw->flash_vendor].cmdPROGRAM);
        ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_SC_ERASE,
                flash_table[hw->flash_vendor].cmdSECTOR_ERASE);
        ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_CHIP_ERASE,
                flash_table[hw->flash_vendor].cmdCHIP_ERASE);
        ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_RDID,
                flash_table[hw->flash_vendor].cmdRDID);
        ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_WREN,
                flash_table[hw->flash_vendor].cmdWREN);
        ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_RDSR,
                flash_table[hw->flash_vendor].cmdRDSR);
        ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_WRSR,
                flash_table[hw->flash_vendor].cmdWRSR);
        ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_READ,
                flash_table[hw->flash_vendor].cmdREAD);
}

/********************************************************************
* Performs basic configuration of the adapter.
*
* hw - Struct containing variables accessed by shared code
* Assumes that the controller has previously been reset and is in a
* post-reset uninitialized state. Initializes multicast table,
* and  Calls routines to setup link
* Leaves the transmit and receive units disabled and uninitialized.
********************************************************************/
static s32 atl2_init_hw(struct atl2_hw *hw)
{
        u32 ret_val = 0;

        atl2_init_pcie(hw);

        /* Zero out the Multicast HASH table */
        /* clear the old settings from the multicast hash table */
        ATL2_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
        ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);

        atl2_init_flash_opcode(hw);

        ret_val = atl2_phy_init(hw);

        return ret_val;
}

/*
 * Detects the current speed and duplex settings of the hardware.
 *
 * hw - Struct containing variables accessed by shared code
 * speed - Speed of the connection
 * duplex - Duplex setting of the connection
 */
static s32 atl2_get_speed_and_duplex(struct atl2_hw *hw, u16 *speed,
        u16 *duplex)
{
        s32 ret_val;
        u16 phy_data;

        /* Read PHY Specific Status Register (17) */
        ret_val = atl2_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data);
        if (ret_val)
                return ret_val;

        if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED))
                return ATLX_ERR_PHY_RES;

        switch (phy_data & MII_ATLX_PSSR_SPEED) {
        case MII_ATLX_PSSR_100MBS:
                *speed = SPEED_100;
                break;
        case MII_ATLX_PSSR_10MBS:
                *speed = SPEED_10;
                break;
        default:
                return ATLX_ERR_PHY_SPEED;
                break;
        }

        if (phy_data & MII_ATLX_PSSR_DPLX)
                *duplex = FULL_DUPLEX;
        else
                *duplex = HALF_DUPLEX;

        return 0;
}

/*
 * Reads the value from a PHY register
 * hw - Struct containing variables accessed by shared code
 * reg_addr - address of the PHY register to read
 */
static s32 atl2_read_phy_reg(struct atl2_hw *hw, u16 reg_addr, u16 *phy_data)
{
        u32 val;
        int i;

        val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
                MDIO_START |
                MDIO_SUP_PREAMBLE |
                MDIO_RW |
                MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
        ATL2_WRITE_REG(hw, REG_MDIO_CTRL, val);

        wmb();

        for (i = 0; i < MDIO_WAIT_TIMES; i++) {
                udelay(2);
                val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
                if (!(val & (MDIO_START | MDIO_BUSY)))
                        break;
                wmb();
        }
        if (!(val & (MDIO_START | MDIO_BUSY))) {
                *phy_data = (u16)val;
                return 0;
        }

        return ATLX_ERR_PHY;
}

/*
 * Writes a value to a PHY register
 * hw - Struct containing variables accessed by shared code
 * reg_addr - address of the PHY register to write
 * data - data to write to the PHY
 */
static s32 atl2_write_phy_reg(struct atl2_hw *hw, u32 reg_addr, u16 phy_data)
{
        int i;
        u32 val;

        val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
                (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
                MDIO_SUP_PREAMBLE |
                MDIO_START |
                MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
        ATL2_WRITE_REG(hw, REG_MDIO_CTRL, val);

        wmb();

        for (i = 0; i < MDIO_WAIT_TIMES; i++) {
                udelay(2);
                val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
                if (!(val & (MDIO_START | MDIO_BUSY)))
                        break;

                wmb();
        }

        if (!(val & (MDIO_START | MDIO_BUSY)))
                return 0;

        return ATLX_ERR_PHY;
}

/*
 * Configures PHY autoneg and flow control advertisement settings
 *
 * hw - Struct containing variables accessed by shared code
 */
static s32 atl2_phy_setup_autoneg_adv(struct atl2_hw *hw)
{
        s32 ret_val;
        s16 mii_autoneg_adv_reg;

        /* Read the MII Auto-Neg Advertisement Register (Address 4). */
        mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;

        /* Need to parse autoneg_advertised  and set up
         * the appropriate PHY registers.  First we will parse for
         * autoneg_advertised software override.  Since we can advertise
         * a plethora of combinations, we need to check each bit
         * individually.
         */

        /* First we clear all the 10/100 mb speed bits in the Auto-Neg
         * Advertisement Register (Address 4) and the 1000 mb speed bits in
         * the  1000Base-T Control Register (Address 9). */
        mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;

        /* Need to parse MediaType and setup the
         * appropriate PHY registers. */
        switch (hw->MediaType) {
        case MEDIA_TYPE_AUTO_SENSOR:
                mii_autoneg_adv_reg |=
                        (MII_AR_10T_HD_CAPS |
                        MII_AR_10T_FD_CAPS  |
                        MII_AR_100TX_HD_CAPS|
                        MII_AR_100TX_FD_CAPS);
                hw->autoneg_advertised =
                        ADVERTISE_10_HALF |
                        ADVERTISE_10_FULL |
                        ADVERTISE_100_HALF|
                        ADVERTISE_100_FULL;
                break;
        case MEDIA_TYPE_100M_FULL:
                mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
                hw->autoneg_advertised = ADVERTISE_100_FULL;
                break;
        case MEDIA_TYPE_100M_HALF:
                mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
                hw->autoneg_advertised = ADVERTISE_100_HALF;
                break;
        case MEDIA_TYPE_10M_FULL:
                mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
                hw->autoneg_advertised = ADVERTISE_10_FULL;
                break;
        default:
                mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
                hw->autoneg_advertised = ADVERTISE_10_HALF;
                break;
        }

        /* flow control fixed to enable all */
        mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);

        hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;

        ret_val = atl2_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);

        if (ret_val)
                return ret_val;

        return 0;
}

/*
 * Resets the PHY and make all config validate
 *
 * hw - Struct containing variables accessed by shared code
 *
 * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
 */
static s32 atl2_phy_commit(struct atl2_hw *hw)
{
        s32 ret_val;
        u16 phy_data;

        phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG;
        ret_val = atl2_write_phy_reg(hw, MII_BMCR, phy_data);
        if (ret_val) {
                u32 val;
                int i;
                /* pcie serdes link may be down ! */
                for (i = 0; i < 25; i++) {
                        msleep(1);
                        val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
                        if (!(val & (MDIO_START | MDIO_BUSY)))
                                break;
                }

                if (0 != (val & (MDIO_START | MDIO_BUSY))) {
                        printk(KERN_ERR "atl2: PCIe link down for at least 25ms !\n");
                        return ret_val;
                }
        }
        return 0;
}

static s32 atl2_phy_init(struct atl2_hw *hw)
{
        s32 ret_val;
        u16 phy_val;

        if (hw->phy_configured)
                return 0;

        /* Enable PHY */
        ATL2_WRITE_REGW(hw, REG_PHY_ENABLE, 1);
        ATL2_WRITE_FLUSH(hw);
        msleep(1);

        /* check if the PHY is in powersaving mode */
        atl2_write_phy_reg(hw, MII_DBG_ADDR, 0);
        atl2_read_phy_reg(hw, MII_DBG_DATA, &phy_val);

        /* 024E / 124E 0r 0274 / 1274 ? */
        if (phy_val & 0x1000) {
                phy_val &= ~0x1000;
                atl2_write_phy_reg(hw, MII_DBG_DATA, phy_val);
        }

        msleep(1);

        /*Enable PHY LinkChange Interrupt */
        ret_val = atl2_write_phy_reg(hw, 18, 0xC00);
        if (ret_val)
                return ret_val;

        /* setup AutoNeg parameters */
        ret_val = atl2_phy_setup_autoneg_adv(hw);
        if (ret_val)
                return ret_val;

        /* SW.Reset & En-Auto-Neg to restart Auto-Neg */
        ret_val = atl2_phy_commit(hw);
        if (ret_val)
                return ret_val;

        hw->phy_configured = true;

        return ret_val;
}

static void atl2_set_mac_addr(struct atl2_hw *hw)
{
        u32 value;
        /* 00-0B-6A-F6-00-DC
         * 0:  6AF600DC   1: 000B
         * low dword */
        value = (((u32)hw->mac_addr[2]) << 24) |
                (((u32)hw->mac_addr[3]) << 16) |
                (((u32)hw->mac_addr[4]) << 8)  |
                (((u32)hw->mac_addr[5]));
        ATL2_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value);
        /* hight dword */
        value = (((u32)hw->mac_addr[0]) << 8) |
                (((u32)hw->mac_addr[1]));
        ATL2_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value);
}

/*
 * check_eeprom_exist
 * return 0 if eeprom exist
 */
static int atl2_check_eeprom_exist(struct atl2_hw *hw)
{
        u32 value;

        value = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
        if (value & SPI_FLASH_CTRL_EN_VPD) {
                value &= ~SPI_FLASH_CTRL_EN_VPD;
                ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
        }
        value = ATL2_READ_REGW(hw, REG_PCIE_CAP_LIST);
        return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
}

/* FIXME: This doesn't look right. -- CHS */
static bool atl2_write_eeprom(struct atl2_hw *hw, u32 offset, u32 value)
{
        return true;
}

static bool atl2_read_eeprom(struct atl2_hw *hw, u32 Offset, u32 *pValue)
{
        int i;
        u32    Control;

        if (Offset & 0x3)
                return false; /* address do not align */

        ATL2_WRITE_REG(hw, REG_VPD_DATA, 0);
        Control = (Offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
        ATL2_WRITE_REG(hw, REG_VPD_CAP, Control);

        for (i = 0; i < 10; i++) {
                msleep(2);
                Control = ATL2_READ_REG(hw, REG_VPD_CAP);
                if (Control & VPD_CAP_VPD_FLAG)
                        break;
        }

        if (Control & VPD_CAP_VPD_FLAG) {
                *pValue = ATL2_READ_REG(hw, REG_VPD_DATA);
                return true;
        }
        return false; /* timeout */
}

static void atl2_force_ps(struct atl2_hw *hw)
{
        u16 phy_val;

        atl2_write_phy_reg(hw, MII_DBG_ADDR, 0);
        atl2_read_phy_reg(hw, MII_DBG_DATA, &phy_val);
        atl2_write_phy_reg(hw, MII_DBG_DATA, phy_val | 0x1000);

        atl2_write_phy_reg(hw, MII_DBG_ADDR, 2);
        atl2_write_phy_reg(hw, MII_DBG_DATA, 0x3000);
        atl2_write_phy_reg(hw, MII_DBG_ADDR, 3);
        atl2_write_phy_reg(hw, MII_DBG_DATA, 0);
}

/* This is the only thing that needs to be changed to adjust the
 * maximum number of ports that the driver can manage.
 */
#define ATL2_MAX_NIC 4

#define OPTION_UNSET    -1
#define OPTION_DISABLED 0
#define OPTION_ENABLED  1

/* All parameters are treated the same, as an integer array of values.
 * This macro just reduces the need to repeat the same declaration code
 * over and over (plus this helps to avoid typo bugs).
 */
#define ATL2_PARAM_INIT {[0 ... ATL2_MAX_NIC] = OPTION_UNSET}
#ifndef module_param_array
/* Module Parameters are always initialized to -1, so that the driver
 * can tell the difference between no user specified value or the
 * user asking for the default value.
 * The true default values are loaded in when atl2_check_options is called.
 *
 * This is a GCC extension to ANSI C.
 * See the item "Labeled Elements in Initializers" in the section
 * "Extensions to the C Language Family" of the GCC documentation.
 */

#define ATL2_PARAM(X, desc) \
    static const int __devinitdata X[ATL2_MAX_NIC + 1] = ATL2_PARAM_INIT; \
    MODULE_PARM(X, "1-" __MODULE_STRING(ATL2_MAX_NIC) "i"); \
    MODULE_PARM_DESC(X, desc);
#else
#define ATL2_PARAM(X, desc) \
    static int __devinitdata X[ATL2_MAX_NIC+1] = ATL2_PARAM_INIT; \
    static int num_##X = 0; \
    module_param_array_named(X, X, int, &num_##X, 0); \
    MODULE_PARM_DESC(X, desc);
#endif

/*
 * Transmit Memory Size
 * Valid Range: 64-2048
 * Default Value: 128
 */
#define ATL2_MIN_TX_MEMSIZE                4        /* 4KB */
#define ATL2_MAX_TX_MEMSIZE                64        /* 64KB */
#define ATL2_DEFAULT_TX_MEMSIZE                8        /* 8KB */
ATL2_PARAM(TxMemSize, "Bytes of Transmit Memory");

/*
 * Receive Memory Block Count
 * Valid Range: 16-512
 * Default Value: 128
 */
#define ATL2_MIN_RXD_COUNT                16
#define ATL2_MAX_RXD_COUNT                512
#define ATL2_DEFAULT_RXD_COUNT                64
ATL2_PARAM(RxMemBlock, "Number of receive memory block");

/*
 * User Specified MediaType Override
 *
 * Valid Range: 0-5
 *  - 0    - auto-negotiate at all supported speeds
 *  - 1    - only link at 1000Mbps Full Duplex
 *  - 2    - only link at 100Mbps Full Duplex
 *  - 3    - only link at 100Mbps Half Duplex
 *  - 4    - only link at 10Mbps Full Duplex
 *  - 5    - only link at 10Mbps Half Duplex
 * Default Value: 0
 */
ATL2_PARAM(MediaType, "MediaType Select");

/*
 * Interrupt Moderate Timer in units of 2048 ns (~2 us)
 * Valid Range: 10-65535
 * Default Value: 45000(90ms)
 */
#define INT_MOD_DEFAULT_CNT        100 /* 200us */
#define INT_MOD_MAX_CNT                65000
#define INT_MOD_MIN_CNT                50
ATL2_PARAM(IntModTimer, "Interrupt Moderator Timer");

/*
 * FlashVendor
 * Valid Range: 0-2
 * 0 - Atmel
 * 1 - SST
 * 2 - ST
 */
ATL2_PARAM(FlashVendor, "SPI Flash Vendor");

#define AUTONEG_ADV_DEFAULT        0x2F
#define AUTONEG_ADV_MASK        0x2F
#define FLOW_CONTROL_DEFAULT        FLOW_CONTROL_FULL

#define FLASH_VENDOR_DEFAULT        0
#define FLASH_VENDOR_MIN        0
#define FLASH_VENDOR_MAX        2

struct atl2_option {
        enum { enable_option, range_option, list_option } type;
        char *name;
        char *err;
        int  def;
        union {
                struct { /* range_option info */
                        int min;
                        int max;
                } r;
                struct { /* list_option info */
                        int nr;
                        struct atl2_opt_list { int i; char *str; } *p;
                } l;
        } arg;
};

static int __devinit atl2_validate_option(int *value, struct atl2_option *opt)
{
        int i;
        struct atl2_opt_list *ent;

        if (*value == OPTION_UNSET) {
                *value = opt->def;
                return 0;
        }

        switch (opt->type) {
        case enable_option:
                switch (*value) {
                case OPTION_ENABLED:
                        printk(KERN_INFO "%s Enabled\n", opt->name);
                        return 0;
                        break;
                case OPTION_DISABLED:
                        printk(KERN_INFO "%s Disabled\n", opt->name);
                        return 0;
                        break;
                }
                break;
        case range_option:
                if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
                        printk(KERN_INFO "%s set to %i\n", opt->name, *value);
                        return 0;
                }
                break;
        case list_option:
                for (i = 0; i < opt->arg.l.nr; i++) {
                        ent = &opt->arg.l.p[i];
                        if (*value == ent->i) {
                                if (ent->str[0] != '\0')
                                        printk(KERN_INFO "%s\n", ent->str);
                        return 0;
                        }
                }
                break;
        default:
                BUG();
        }

        printk(KERN_INFO "Invalid %s specified (%i) %s\n",
                opt->name, *value, opt->err);
        *value = opt->def;
        return -1;
}

/*
 * atl2_check_options - Range Checking for Command Line Parameters
 * @adapter: board private structure
 *
 * This routine checks all command line parameters for valid user
 * input.  If an invalid value is given, or if no user specified
 * value exists, a default value is used.  The final value is stored
 * in a variable in the adapter structure.
 */
static void __devinit atl2_check_options(struct atl2_adapter *adapter)
{
        int val;
        struct atl2_option opt;
        int bd = adapter->bd_number;
        if (bd >= ATL2_MAX_NIC) {
                printk(KERN_NOTICE "Warning: no configuration for board #%i\n",
                        bd);
                printk(KERN_NOTICE "Using defaults for all values\n");
#ifndef module_param_array
                bd = ATL2_MAX_NIC;
#endif
        }

        /* Bytes of Transmit Memory */
        opt.type = range_option;
        opt.name = "Bytes of Transmit Memory";
        opt.err = "using default of " __MODULE_STRING(ATL2_DEFAULT_TX_MEMSIZE);
        opt.def = ATL2_DEFAULT_TX_MEMSIZE;
        opt.arg.r.min = ATL2_MIN_TX_MEMSIZE;
        opt.arg.r.max = ATL2_MAX_TX_MEMSIZE;
#ifdef module_param_array
        if (num_TxMemSize > bd) {
#endif
                val = TxMemSize[bd];
                atl2_validate_option(&val, &opt);
                adapter->txd_ring_size = ((u32) val) * 1024;
#ifdef module_param_array
        } else
                adapter->txd_ring_size = ((u32)opt.def) * 1024;
#endif
        /* txs ring size: */
        adapter->txs_ring_size = adapter->txd_ring_size / 128;
        if (adapter->txs_ring_size > 160)
                adapter->txs_ring_size = 160;

        /* Receive Memory Block Count */
        opt.type = range_option;
        opt.name = "Number of receive memory block";
        opt.err = "using default of " __MODULE_STRING(ATL2_DEFAULT_RXD_COUNT);
        opt.def = ATL2_DEFAULT_RXD_COUNT;
        opt.arg.r.min = ATL2_MIN_RXD_COUNT;
        opt.arg.r.max = ATL2_MAX_RXD_COUNT;
#ifdef module_param_array
        if (num_RxMemBlock > bd) {
#endif
                val = RxMemBlock[bd];
                atl2_validate_option(&val, &opt);
                adapter->rxd_ring_size = (u32)val;
                /* FIXME */
                /* ((u16)val)&~1; */        /* even number */
#ifdef module_param_array
        } else
                adapter->rxd_ring_size = (u32)opt.def;
#endif
        /* init RXD Flow control value */
        adapter->hw.fc_rxd_hi = (adapter->rxd_ring_size / 8) * 7;
        adapter->hw.fc_rxd_lo = (ATL2_MIN_RXD_COUNT / 8) >
                (adapter->rxd_ring_size / 12) ? (ATL2_MIN_RXD_COUNT / 8) :
                (adapter->rxd_ring_size / 12);

        /* Interrupt Moderate Timer */
        opt.type = range_option;
        opt.name = "Interrupt Moderate Timer";
        opt.err = "using default of " __MODULE_STRING(INT_MOD_DEFAULT_CNT);
        opt.def = INT_MOD_DEFAULT_CNT;
        opt.arg.r.min = INT_MOD_MIN_CNT;
        opt.arg.r.max = INT_MOD_MAX_CNT;
#ifdef module_param_array
        if (num_IntModTimer > bd) {
#endif
                val = IntModTimer[bd];
                atl2_validate_option(&val, &opt);
                adapter->imt = (u16) val;
#ifdef module_param_array
        } else
                adapter->imt = (u16)(opt.def);
#endif
        /* Flash Vendor */
        opt.type = range_option;
        opt.name = "SPI Flash Vendor";
        opt.err = "using default of " __MODULE_STRING(FLASH_VENDOR_DEFAULT);
        opt.def = FLASH_VENDOR_DEFAULT;
        opt.arg.r.min = FLASH_VENDOR_MIN;
        opt.arg.r.max = FLASH_VENDOR_MAX;
#ifdef module_param_array
        if (num_FlashVendor > bd) {
#endif
                val = FlashVendor[bd];
                atl2_validate_option(&val, &opt);
                adapter->hw.flash_vendor = (u8) val;
#ifdef module_param_array
        } else
                adapter->hw.flash_vendor = (u8)(opt.def);
#endif
        /* MediaType */
        opt.type = range_option;
        opt.name = "Speed/Duplex Selection";
        opt.err = "using default of " __MODULE_STRING(MEDIA_TYPE_AUTO_SENSOR);
        opt.def = MEDIA_TYPE_AUTO_SENSOR;
        opt.arg.r.min = MEDIA_TYPE_AUTO_SENSOR;
        opt.arg.r.max = MEDIA_TYPE_10M_HALF;
#ifdef module_param_array
        if (num_MediaType > bd) {
#endif
                val = MediaType[bd];
                atl2_validate_option(&val, &opt);
                adapter->hw.MediaType = (u16) val;
#ifdef module_param_array
        } else
                adapter->hw.MediaType = (u16)(opt.def);
#endif
}