ClabureDB: Classified Bug-Reports Database

  /*
   * OHCI HCD (Host Controller Driver) for USB.
   *
   * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
   *
   * This file is licenced under GPL
   */
  
 /*-------------------------------------------------------------------------*/
 
 /*
  * OHCI Root Hub ... the nonsharable stuff
  */
 
 #define dbg_port(hc,label,num,value) \
         ohci_dbg (hc, \
                 "%s roothub.portstatus [%d] " \
                 "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
                 label, num, temp, \
                 (temp & RH_PS_PRSC) ? " PRSC" : "", \
                 (temp & RH_PS_OCIC) ? " OCIC" : "", \
                 (temp & RH_PS_PSSC) ? " PSSC" : "", \
                 (temp & RH_PS_PESC) ? " PESC" : "", \
                 (temp & RH_PS_CSC) ? " CSC" : "", \
                 \
                 (temp & RH_PS_LSDA) ? " LSDA" : "", \
                 (temp & RH_PS_PPS) ? " PPS" : "", \
                 (temp & RH_PS_PRS) ? " PRS" : "", \
                 (temp & RH_PS_POCI) ? " POCI" : "", \
                 (temp & RH_PS_PSS) ? " PSS" : "", \
                 \
                 (temp & RH_PS_PES) ? " PES" : "", \
                 (temp & RH_PS_CCS) ? " CCS" : "" \
                 );
 
 /*-------------------------------------------------------------------------*/
 
 #define OHCI_SCHED_ENABLES \
         (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
 
 static void dl_done_list (struct ohci_hcd *);
 static void finish_unlinks (struct ohci_hcd *, u16);
 
 #ifdef        CONFIG_PM
 static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop)
 __releases(ohci->lock)
 __acquires(ohci->lock)
 {
         int                        status = 0;
 
         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
         switch (ohci->hc_control & OHCI_CTRL_HCFS) {
         case OHCI_USB_RESUME:
                 ohci_dbg (ohci, "resume/suspend?\n");
                 ohci->hc_control &= ~OHCI_CTRL_HCFS;
                 ohci->hc_control |= OHCI_USB_RESET;
                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
                 (void) ohci_readl (ohci, &ohci->regs->control);
                 /* FALL THROUGH */
         case OHCI_USB_RESET:
                 status = -EBUSY;
                 ohci_dbg (ohci, "needs reinit!\n");
                 goto done;
         case OHCI_USB_SUSPEND:
                 if (!ohci->autostop) {
                         ohci_dbg (ohci, "already suspended\n");
                         goto done;
                 }
         }
         ohci_dbg (ohci, "%s root hub\n",
                         autostop ? "auto-stop" : "suspend");
 
         /* First stop any processing */
         if (!autostop && (ohci->hc_control & OHCI_SCHED_ENABLES)) {
                 ohci->hc_control &= ~OHCI_SCHED_ENABLES;
                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
                 ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
                 ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrstatus);
 
                 /* sched disables take effect on the next frame,
                  * then the last WDH could take 6+ msec
                  */
                 ohci_dbg (ohci, "stopping schedules ...\n");
                 ohci->autostop = 0;
                 spin_unlock_irq (&ohci->lock);
                 msleep (8);
                 spin_lock_irq (&ohci->lock);
         }
         dl_done_list (ohci);
         finish_unlinks (ohci, ohci_frame_no(ohci));
 
         /* maybe resume can wake root hub */
         if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) {
                 ohci->hc_control |= OHCI_CTRL_RWE;
         } else {
                 ohci_writel(ohci, OHCI_INTR_RHSC | OHCI_INTR_RD,
                                 &ohci->regs->intrdisable);
                 ohci->hc_control &= ~OHCI_CTRL_RWE;
        }

        /* Suspend hub ... this is the "global (to this bus) suspend" mode,
         * which doesn't imply ports will first be individually suspended.
         */
        ohci->hc_control &= ~OHCI_CTRL_HCFS;
        ohci->hc_control |= OHCI_USB_SUSPEND;
        ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
        (void) ohci_readl (ohci, &ohci->regs->control);

        /* no resumes until devices finish suspending */
        if (!autostop) {
                ohci->next_statechange = jiffies + msecs_to_jiffies (5);
                ohci->autostop = 0;
        }

done:
        return status;
}

static inline struct ed *find_head (struct ed *ed)
{
        /* for bulk and control lists */
        while (ed->ed_prev)
                ed = ed->ed_prev;
        return ed;
}

/* caller has locked the root hub */
static int ohci_rh_resume (struct ohci_hcd *ohci)
__releases(ohci->lock)
__acquires(ohci->lock)
{
        struct usb_hcd                *hcd = ohci_to_hcd (ohci);
        u32                        temp, enables;
        int                        status = -EINPROGRESS;
        int                        autostopped = ohci->autostop;

        ohci->autostop = 0;
        ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);

        if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
                /* this can happen after resuming a swsusp snapshot */
                if (hcd->state == HC_STATE_RESUMING) {
                        ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
                                        ohci->hc_control);
                        status = -EBUSY;
                /* this happens when pmcore resumes HC then root */
                } else {
                        ohci_dbg (ohci, "duplicate resume\n");
                        status = 0;
                }
        } else switch (ohci->hc_control & OHCI_CTRL_HCFS) {
        case OHCI_USB_SUSPEND:
                ohci->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
                ohci->hc_control |= OHCI_USB_RESUME;
                ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
                (void) ohci_readl (ohci, &ohci->regs->control);
                ohci_dbg (ohci, "%s root hub\n",
                                autostopped ? "auto-start" : "resume");
                break;
        case OHCI_USB_RESUME:
                /* HCFS changes sometime after INTR_RD */
                ohci_dbg(ohci, "%swakeup root hub\n",
                                autostopped ? "auto-" : "");
                break;
        case OHCI_USB_OPER:
                /* this can happen after resuming a swsusp snapshot */
                ohci_dbg (ohci, "snapshot resume? reinit\n");
                status = -EBUSY;
                break;
        default:                /* RESET, we lost power */
                ohci_dbg (ohci, "lost power\n");
                status = -EBUSY;
        }
        if (status == -EBUSY) {
                if (!autostopped) {
                        spin_unlock_irq (&ohci->lock);
                        (void) ohci_init (ohci);
                        status = ohci_restart (ohci);

                        usb_root_hub_lost_power(hcd->self.root_hub);

                        spin_lock_irq (&ohci->lock);
                }
                return status;
        }
        if (status != -EINPROGRESS)
                return status;
        if (autostopped)
                goto skip_resume;
        spin_unlock_irq (&ohci->lock);

        /* Some controllers (lucent erratum) need extra-long delays */
        msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);

        temp = ohci_readl (ohci, &ohci->regs->control);
        temp &= OHCI_CTRL_HCFS;
        if (temp != OHCI_USB_RESUME) {
                ohci_err (ohci, "controller won't resume\n");
                spin_lock_irq(&ohci->lock);
                return -EBUSY;
        }

        /* disable old schedule state, reinit from scratch */
        ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
        ohci_writel (ohci, 0, &ohci->regs->ed_controlcurrent);
        ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
        ohci_writel (ohci, 0, &ohci->regs->ed_bulkcurrent);
        ohci_writel (ohci, 0, &ohci->regs->ed_periodcurrent);
        ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);

        /* Sometimes PCI D3 suspend trashes frame timings ... */
        periodic_reinit (ohci);

        /* the following code is executed with ohci->lock held and
         * irqs disabled if and only if autostopped is true
         */

skip_resume:
        /* interrupts might have been disabled */
        ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable);
        if (ohci->ed_rm_list)
                ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);

        /* Then re-enable operations */
        ohci_writel (ohci, OHCI_USB_OPER, &ohci->regs->control);
        (void) ohci_readl (ohci, &ohci->regs->control);
        if (!autostopped)
                msleep (3);

        temp = ohci->hc_control;
        temp &= OHCI_CTRL_RWC;
        temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
        ohci->hc_control = temp;
        ohci_writel (ohci, temp, &ohci->regs->control);
        (void) ohci_readl (ohci, &ohci->regs->control);

        /* TRSMRCY */
        if (!autostopped) {
                msleep (10);
                spin_lock_irq (&ohci->lock);
        }
        /* now ohci->lock is always held and irqs are always disabled */

        /* keep it alive for more than ~5x suspend + resume costs */
        ohci->next_statechange = jiffies + STATECHANGE_DELAY;

        /* maybe turn schedules back on */
        enables = 0;
        temp = 0;
        if (!ohci->ed_rm_list) {
                if (ohci->ed_controltail) {
                        ohci_writel (ohci,
                                        find_head (ohci->ed_controltail)->dma,
                                        &ohci->regs->ed_controlhead);
                        enables |= OHCI_CTRL_CLE;
                        temp |= OHCI_CLF;
                }
                if (ohci->ed_bulktail) {
                        ohci_writel (ohci, find_head (ohci->ed_bulktail)->dma,
                                &ohci->regs->ed_bulkhead);
                        enables |= OHCI_CTRL_BLE;
                        temp |= OHCI_BLF;
                }
        }
        if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
                enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
        if (enables) {
                ohci_dbg (ohci, "restarting schedules ... %08x\n", enables);
                ohci->hc_control |= enables;
                ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
                if (temp)
                        ohci_writel (ohci, temp, &ohci->regs->cmdstatus);
                (void) ohci_readl (ohci, &ohci->regs->control);
        }

        return 0;
}

static int ohci_bus_suspend (struct usb_hcd *hcd)
{
        struct ohci_hcd                *ohci = hcd_to_ohci (hcd);
        int                        rc;

        spin_lock_irq (&ohci->lock);

        if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
                rc = -ESHUTDOWN;
        else
                rc = ohci_rh_suspend (ohci, 0);
        spin_unlock_irq (&ohci->lock);
        return rc;
}

static int ohci_bus_resume (struct usb_hcd *hcd)
{
        struct ohci_hcd                *ohci = hcd_to_ohci (hcd);
        int                        rc;

        if (time_before (jiffies, ohci->next_statechange))
                msleep(5);

        spin_lock_irq (&ohci->lock);

        if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
                rc = -ESHUTDOWN;
        else
                rc = ohci_rh_resume (ohci);
        spin_unlock_irq (&ohci->lock);

        /* poll until we know a device is connected or we autostop */
        if (rc == 0)
                usb_hcd_poll_rh_status(hcd);
        return rc;
}

/* Carry out the final steps of resuming the controller device */
static void ohci_finish_controller_resume(struct usb_hcd *hcd)
{
        struct ohci_hcd                *ohci = hcd_to_ohci(hcd);
        int                        port;
        bool                        need_reinit = false;

        /* See if the controller is already running or has been reset */
        ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
        if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
                need_reinit = true;
        } else {
                switch (ohci->hc_control & OHCI_CTRL_HCFS) {
                case OHCI_USB_OPER:
                case OHCI_USB_RESET:
                        need_reinit = true;
                }
        }

        /* If needed, reinitialize and suspend the root hub */
        if (need_reinit) {
                spin_lock_irq(&ohci->lock);
                hcd->state = HC_STATE_RESUMING;
                ohci_rh_resume(ohci);
                hcd->state = HC_STATE_QUIESCING;
                ohci_rh_suspend(ohci, 0);
                hcd->state = HC_STATE_SUSPENDED;
                spin_unlock_irq(&ohci->lock);
        }

        /* Normally just turn on port power and enable interrupts */
        else {
                ohci_dbg(ohci, "powerup ports\n");
                for (port = 0; port < ohci->num_ports; port++)
                        ohci_writel(ohci, RH_PS_PPS,
                                        &ohci->regs->roothub.portstatus[port]);

                ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
                ohci_readl(ohci, &ohci->regs->intrenable);
                msleep(20);
        }
}

/* Carry out polling-, autostop-, and autoresume-related state changes */
static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
                int any_connected, int rhsc_status)
{
        int        poll_rh = 1;
        int        rhsc_enable;

        /* Some broken controllers never turn off RHCS in the interrupt
         * status register.  For their sake we won't re-enable RHSC
         * interrupts if the interrupt bit is already active.
         */
        rhsc_enable = ohci_readl(ohci, &ohci->regs->intrenable) &
                        OHCI_INTR_RHSC;

        switch (ohci->hc_control & OHCI_CTRL_HCFS) {
        case OHCI_USB_OPER:
                /* If no status changes are pending, enable RHSC interrupts. */
                if (!rhsc_enable && !rhsc_status && !changed) {
                        rhsc_enable = OHCI_INTR_RHSC;
                        ohci_writel(ohci, rhsc_enable, &ohci->regs->intrenable);
                }

                /* Keep on polling until we know a device is connected
                 * and RHSC is enabled, or until we autostop.
                 */
                if (!ohci->autostop) {
                        if (any_connected ||
                                        !device_may_wakeup(&ohci_to_hcd(ohci)
                                                ->self.root_hub->dev)) {
                                if (rhsc_enable)
                                        poll_rh = 0;
                        } else {
                                ohci->autostop = 1;
                                ohci->next_statechange = jiffies + HZ;
                        }

                /* if no devices have been attached for one second, autostop */
                } else {
                        if (changed || any_connected) {
                                ohci->autostop = 0;
                                ohci->next_statechange = jiffies +
                                                STATECHANGE_DELAY;
                        } else if (time_after_eq(jiffies,
                                                ohci->next_statechange)
                                        && !ohci->ed_rm_list
                                        && !(ohci->hc_control &
                                                OHCI_SCHED_ENABLES)) {
                                ohci_rh_suspend(ohci, 1);
                                if (rhsc_enable)
                                        poll_rh = 0;
                        }
                }
                break;

        case OHCI_USB_SUSPEND:
        case OHCI_USB_RESUME:
                /* if there is a port change, autostart or ask to be resumed */
                if (changed) {
                        if (ohci->autostop)
                                ohci_rh_resume(ohci);
                        else
                                usb_hcd_resume_root_hub(ohci_to_hcd(ohci));

                /* If remote wakeup is disabled, stop polling */
                } else if (!ohci->autostop &&
                                !ohci_to_hcd(ohci)->self.root_hub->
                                        do_remote_wakeup) {
                        poll_rh = 0;

                } else {
                        /* If no status changes are pending,
                         * enable RHSC interrupts
                         */
                        if (!rhsc_enable && !rhsc_status) {
                                rhsc_enable = OHCI_INTR_RHSC;
                                ohci_writel(ohci, rhsc_enable,
                                                &ohci->regs->intrenable);
                        }
                        /* Keep polling until RHSC is enabled */
                        if (rhsc_enable)
                                poll_rh = 0;
                }
                break;
        }
        return poll_rh;
}

#else        /* CONFIG_PM */

static inline int ohci_rh_resume(struct ohci_hcd *ohci)
{
        return 0;
}

/* Carry out polling-related state changes.
 * autostop isn't used when CONFIG_PM is turned off.
 */
static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
                int any_connected, int rhsc_status)
{
        /* If RHSC is enabled, don't poll */
        if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
                return 0;

        /* If status changes are pending, continue polling.
         * Conversely, if no status changes are pending but the RHSC
         * status bit was set, then RHSC may be broken so continue polling.
         */
        if (changed || rhsc_status)
                return 1;

        /* It's safe to re-enable RHSC interrupts */
        ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
        return 0;
}

#endif        /* CONFIG_PM */

/*-------------------------------------------------------------------------*/

/* build "status change" packet (one or two bytes) from HC registers */

static int
ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
{
        struct ohci_hcd        *ohci = hcd_to_ohci (hcd);
        int                i, changed = 0, length = 1;
        int                any_connected = 0;
        int                rhsc_status;
        unsigned long        flags;

        spin_lock_irqsave (&ohci->lock, flags);
        if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
                goto done;

        /* undocumented erratum seen on at least rev D */
        if ((ohci->flags & OHCI_QUIRK_AMD756)
                        && (roothub_a (ohci) & RH_A_NDP) > MAX_ROOT_PORTS) {
                ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n",
                          ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP);
                /* retry later; "should not happen" */
                goto done;
        }

        /* init status */
        if (roothub_status (ohci) & (RH_HS_LPSC | RH_HS_OCIC))
                buf [0] = changed = 1;
        else
                buf [0] = 0;
        if (ohci->num_ports > 7) {
                buf [1] = 0;
                length++;
        }

        /* Clear the RHSC status flag before reading the port statuses */
        ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrstatus);
        rhsc_status = ohci_readl(ohci, &ohci->regs->intrstatus) &
                        OHCI_INTR_RHSC;

        /* look at each port */
        for (i = 0; i < ohci->num_ports; i++) {
                u32        status = roothub_portstatus (ohci, i);

                /* can't autostop if ports are connected */
                any_connected |= (status & RH_PS_CCS);

                if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
                                | RH_PS_OCIC | RH_PS_PRSC)) {
                        changed = 1;
                        if (i < 7)
                            buf [0] |= 1 << (i + 1);
                        else
                            buf [1] |= 1 << (i - 7);
                }
        }

        hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed,
                        any_connected, rhsc_status);

done:
        spin_unlock_irqrestore (&ohci->lock, flags);

        return changed ? length : 0;
}

/*-------------------------------------------------------------------------*/

static void
ohci_hub_descriptor (
        struct ohci_hcd                        *ohci,
        struct usb_hub_descriptor        *desc
) {
        u32                rh = roothub_a (ohci);
        u16                temp;

        desc->bDescriptorType = 0x29;
        desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24;
        desc->bHubContrCurrent = 0;

        desc->bNbrPorts = ohci->num_ports;
        temp = 1 + (ohci->num_ports / 8);
        desc->bDescLength = 7 + 2 * temp;

        temp = 0;
        if (rh & RH_A_NPS)                /* no power switching? */
            temp |= 0x0002;
        if (rh & RH_A_PSM)                /* per-port power switching? */
            temp |= 0x0001;
        if (rh & RH_A_NOCP)                /* no overcurrent reporting? */
            temp |= 0x0010;
        else if (rh & RH_A_OCPM)        /* per-port overcurrent reporting? */
            temp |= 0x0008;
        desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ohci, temp);

        /* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
        rh = roothub_b (ohci);
        memset(desc->bitmap, 0xff, sizeof(desc->bitmap));
        desc->bitmap [0] = rh & RH_B_DR;
        if (ohci->num_ports > 7) {
                desc->bitmap [1] = (rh & RH_B_DR) >> 8;
                desc->bitmap [2] = 0xff;
        } else
                desc->bitmap [1] = 0xff;
}

/*-------------------------------------------------------------------------*/

#ifdef        CONFIG_USB_OTG

static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port)
{
        struct ohci_hcd        *ohci = hcd_to_ohci (hcd);
        u32                        status;

        if (!port)
                return -EINVAL;
        port--;

        /* start port reset before HNP protocol times out */
        status = ohci_readl(ohci, &ohci->regs->roothub.portstatus [port]);
        if (!(status & RH_PS_CCS))
                return -ENODEV;

        /* khubd will finish the reset later */
        ohci_writel(ohci, RH_PS_PRS, &ohci->regs->roothub.portstatus [port]);
        return 0;
}

#else

#define        ohci_start_port_reset                NULL

#endif

/*-------------------------------------------------------------------------*/


/* See usb 7.1.7.5:  root hubs must issue at least 50 msec reset signaling,
 * not necessarily continuous ... to guard against resume signaling.
 * The short timeout is safe for non-root hubs, and is backward-compatible
 * with earlier Linux hosts.
 */
#ifdef        CONFIG_USB_SUSPEND
#define        PORT_RESET_MSEC                50
#else
#define        PORT_RESET_MSEC                10
#endif

/* this timer value might be vendor-specific ... */
#define        PORT_RESET_HW_MSEC        10

/* wrap-aware logic morphed from <linux/jiffies.h> */
#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)

/* called from some task, normally khubd */
static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
{
        __hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
        u32        temp = 0;
        u16        now = ohci_readl(ohci, &ohci->regs->fmnumber);
        u16        reset_done = now + PORT_RESET_MSEC;
        int        limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC);

        /* build a "continuous enough" reset signal, with up to
         * 3msec gap between pulses.  scheduler HZ==100 must work;
         * this might need to be deadline-scheduled.
         */
        do {
                int limit_2;

                /* spin until any current reset finishes */
                limit_2 = PORT_RESET_HW_MSEC * 2;
                while (--limit_2 >= 0) {
                        temp = ohci_readl (ohci, portstat);
                        /* handle e.g. CardBus eject */
                        if (temp == ~(u32)0)
                                return -ESHUTDOWN;
                        if (!(temp & RH_PS_PRS))
                                break;
                        udelay (500);
                }

                /* timeout (a hardware error) has been observed when
                 * EHCI sets CF while this driver is resetting a port;
                 * presumably other disconnect paths might do it too.
                 */
                if (limit_2 < 0) {
                        ohci_dbg(ohci,
                                "port[%d] reset timeout, stat %08x\n",
                                port, temp);
                        break;
                }

                if (!(temp & RH_PS_CCS))
                        break;
                if (temp & RH_PS_PRSC)
                        ohci_writel (ohci, RH_PS_PRSC, portstat);

                /* start the next reset, sleep till it's probably done */
                ohci_writel (ohci, RH_PS_PRS, portstat);
                msleep(PORT_RESET_HW_MSEC);
                now = ohci_readl(ohci, &ohci->regs->fmnumber);
        } while (tick_before(now, reset_done) && --limit_1 >= 0);

        /* caller synchronizes using PRSC ... and handles PRS
         * still being set when this returns.
         */

        return 0;
}

static int ohci_hub_control (
        struct usb_hcd        *hcd,
        u16                typeReq,
        u16                wValue,
        u16                wIndex,
        char                *buf,
        u16                wLength
) {
        struct ohci_hcd        *ohci = hcd_to_ohci (hcd);
        int                ports = hcd_to_bus (hcd)->root_hub->maxchild;
        u32                temp;
        int                retval = 0;

        if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
                return -ESHUTDOWN;

        switch (typeReq) {
        case ClearHubFeature:
                switch (wValue) {
                case C_HUB_OVER_CURRENT:
                        ohci_writel (ohci, RH_HS_OCIC,
                                        &ohci->regs->roothub.status);
                case C_HUB_LOCAL_POWER:
                        break;
                default:
                        goto error;
                }
                break;
        case ClearPortFeature:
                if (!wIndex || wIndex > ports)
                        goto error;
                wIndex--;

                switch (wValue) {
                case USB_PORT_FEAT_ENABLE:
                        temp = RH_PS_CCS;
                        break;
                case USB_PORT_FEAT_C_ENABLE:
                        temp = RH_PS_PESC;
                        break;
                case USB_PORT_FEAT_SUSPEND:
                        temp = RH_PS_POCI;
                        break;
                case USB_PORT_FEAT_C_SUSPEND:
                        temp = RH_PS_PSSC;
                        break;
                case USB_PORT_FEAT_POWER:
                        temp = RH_PS_LSDA;
                        break;
                case USB_PORT_FEAT_C_CONNECTION:
                        temp = RH_PS_CSC;
                        break;
                case USB_PORT_FEAT_C_OVER_CURRENT:
                        temp = RH_PS_OCIC;
                        break;
                case USB_PORT_FEAT_C_RESET:
                        temp = RH_PS_PRSC;
                        break;
                default:
                        goto error;
                }
                ohci_writel (ohci, temp,
                                &ohci->regs->roothub.portstatus [wIndex]);
                // ohci_readl (ohci, &ohci->regs->roothub.portstatus [wIndex]);
                break;
        case GetHubDescriptor:
                ohci_hub_descriptor (ohci, (struct usb_hub_descriptor *) buf);
                break;
        case GetHubStatus:
                temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
                put_unaligned_le32(temp, buf);
                break;
        case GetPortStatus:
                if (!wIndex || wIndex > ports)
                        goto error;
                wIndex--;
                temp = roothub_portstatus (ohci, wIndex);
                put_unaligned_le32(temp, buf);

#ifndef        OHCI_VERBOSE_DEBUG
        if (*(u16*)(buf+2))        /* only if wPortChange is interesting */
#endif
                dbg_port (ohci, "GetStatus", wIndex, temp);
                break;
        case SetHubFeature:
                switch (wValue) {
                case C_HUB_OVER_CURRENT:
                        // FIXME:  this can be cleared, yes?
                case C_HUB_LOCAL_POWER:
                        break;
                default:
                        goto error;
                }
                break;
        case SetPortFeature:
                if (!wIndex || wIndex > ports)
                        goto error;
                wIndex--;
                switch (wValue) {
                case USB_PORT_FEAT_SUSPEND:
#ifdef        CONFIG_USB_OTG
                        if (hcd->self.otg_port == (wIndex + 1)
                                        && hcd->self.b_hnp_enable)
                                ohci->start_hnp(ohci);
                        else
#endif
                        ohci_writel (ohci, RH_PS_PSS,
                                &ohci->regs->roothub.portstatus [wIndex]);
                        break;
                case USB_PORT_FEAT_POWER:
                        ohci_writel (ohci, RH_PS_PPS,
                                &ohci->regs->roothub.portstatus [wIndex]);
                        break;
                case USB_PORT_FEAT_RESET:
                        retval = root_port_reset (ohci, wIndex);
                        break;
                default:
                        goto error;
                }
                break;

        default:
error:
                /* "protocol stall" on error */
                retval = -EPIPE;
        }
        return retval;
}